Goonie Lifer

I reset the dramm voltage to 1.35 and then set the frequency to 3200 and booted up first try! thanks for the help

no luck. mobo cpu debugging light kicks in and stays in a cycle.

ok, will update later. thanks

I had to edit my original post cause i entered it too soon by accident. Hopefully my update helps out more

My original build started with the Ryzen 5 3600 and had no problems enabling XMP settings running at 3600mhz. Also was able to enable PBO and Game mode from bios. Only thing i changed was the cpu. CLeared cmos and for some reason when i just enable xmp profile, my computer just goes into a forever boot. My cpu debug light kicks in also. This build only a month old with everything being updated. Will only run at default settings now. I tried enabling xmp profile to whats rated from maufacturer and still crashes Specs: Ryzen 9 3900x MSI Gaming Pro Carbom AC B450 with recently updated bios GSkill TridentZ 2x8gb 3600mhz CAS 16 EVGA 750 GQ 80+ Gold EVGA 360mm AIO Cooler EVGA RTX 2070 Ultra XC WD Blue nand sata m.2 2280 500gb

The PBO is not enabled. I guess my next step will be reseating my cooler. Thanks for all the feedback

The board im running is an MSI B450 Gaming Pro Carbon. Where should i look to see if it has AI tools and how do i know what profile to look for thats loaded in the BIOS

The BIOS came already updated being the board was built 4/20/2020. All the latest drivers are all updated and have not touched any overclocking whatsoever. My next step is to add an aio cooler.

On the left is msi afterburner showing cpu temp at 53. Middle one is ryzen master at 44, and cpuid moniter on the right is showing a temp at 44 but the package node temp at 54. I'm new to all of this so im not sure what i should be looking at

I just recently built my compter. Nothing is overclocked, kept everything stock with a stock wraith air cooler. I recently played a game and the MSI afterburner showed my cpu temp at almost 100 degrees! I looked at cpuid moniter and it showed it at 95 degrees. Looking at the pic i uploaded, i'm getting different temps from the three monitors i have; MSI afterburner, cpuid moniter, and ryzen master. What program is the best to look at when it comes to temps for my cpu?

sorry for the late response, i've been gone for a bit. Everything is running right after installing driver and software. Thanks

update to this. It can connect to a ps4 controller but not to an Astro C40

I recently finished my first coomputer build. After all installs and updates, everyting runs fine. For some reason when i connect a bluetooth conroller to play online games, the controller doesnt show up but i can hear sound through a connected headset. Not sure whats going on. Games wont give me the option to change to controller. I downloaded DS4 windows and that doesnt recognize my controller.

i guess one more question, if you're running games that have a hugh multiplayer content like COD Warzone,will it still run the same compared to playing a single player game

will it only affect the load times only or the whole game play?