Hi all, I recently got an M.2 Drive and when I turn on my PC with my HDD plugged in it takes me into the boot loop "G:\Recovery\WindowsRE\Winre.wim\System32\Logfiles\Srt\SrtTrail.txt" . When I messed around in there before it never took me into windows 10, it always brought me into a boot loop starting with that page. The only way out of that boot loop is to turn off my PC, open my PC case, unplug my HDD and restart my PC. When I load it all up again with my M.2 Drive it then takes me to the bios but it does not detect my M.2(but when I click save and exit it works so i guess that's okay?) and when I click save and exit it shows another screen saying "Choose your operating system" and the 2 options are Windows 10 and Macrium Reflect , I used that to move Windows 10 to my M.2 from my HDD. Then it works as it should be, just without my HDD and when I plug in my HDD back into my PC and restart it doesn't do that boot loop if I am lucky.
All in all, I want to load up my PC with my M.2 without having to do this every time. I don't really know what to do.
The M.2 I use is the WD Blue SN550 500GB NVMe Internal SSD - Gen3 x4 PCIe 8Gb/s, M.2 2280, 3D NAND, Up to 2,400 MB/s - WDS500G2B0C off of Amazon
The HDD I use is WD Blue 1TB Desktop Hard Disk Drive - 7200 RPM SATA 6Gb/s 64MB Cache 3.5 Inch - WD10EZEX - OEM off of Newegg.
If it helps, my other specs are 32GB 3200 MHZ RAM , Nvidia GTX 1070 Founders Edition , ASUS X99-DELUXE II LGA 2011-v3 ATX Motherboard (Renewed) , EVGA SuperNOVA 850 G2 220-G2-0850-XR 80+ GOLD 850W Fully Modular EVGA ECO Mode Includes FREE Power On Self Tester Power Supply and Intel Core i7-5820K Haswell-E 6-Core 3.3 GHz LGA 2011-v3 140W BX80648I75820K Desktop Processor.