Schmidty87

Thanks wasn't 100% sure about that lol.

So I had something weird happen while building my new itx pc when I first booted into the bios is saw this weirdness its a asrock b550i/ax out of a corsair one pro. Does this mean its a better board than just a regular asrock board?ooted into the bios I saw this weirdness

well i figured out how to get the rgb to work lol. i recently was gifted a egva 280 clc by my gf and when i installed the clc controller the graphics cooler popped up under there lol. i guess it kinda makes sense seeing as its an evga cooler, but its on a pny card lmao

Further info I put a evga black edition cooler onto it

Cause Pny uses the same pcb for their blower card and it has the connector at the bottom of the pcb as the evga cooler uses, the light turns on but I can't change the color

So got the cooler installed and im running the fans at full tilt. the most the gpu gets to is 63c the memory gets to about 75c but i ordered a heat sink kit and im going to try and fit them under the cooler and see what that does

Well is was going to try and flash it to the three fan card bios seeing how I just replaced the blower with a evga cooler but it won't control the rgb

Pny has discontinued my graphics card is there any way to flash the bios to the newest version as all im find is the bios for their 3k series cards now.

so apparently my graphics card is discontinued by pny so i cant find any bios update

Was honestly looking into these as there's a bigger selection https://www.amazon.com/dp/B084X4VMP9/ref=cm_sw_r_cp_awdb_imm_3PTQS5AWQMC3RBQREH4X But also I saw this cooler and it gave me the same idea https://www.amazon.com/dp/B08L4YQJG3/ref=cm_sw_r_cp_apa_glt_fabc_VT8ESDY012SM3QDFGJT8?_encoding=UTF8&psc=1

Well as it's a blower card I'll have to atleast take off the outer shroud so I can get a good look at it to compare and try and measure

That's what I was looking at and again my thought would be if it would fit under the cooler

So i have a 2080super card that is a blower card, I had a friend that gave me the stock cooler off of his evga black edition that will work on my card but he cant find the midplate. will this cause heating issues in the memory and other components, or should it be ok as long as i run the funs an like 80% as they will have direct airflow on them that way. the reason i ask is i was looking at the nzxt g12 plate and it doesn't use the midplate to cool the vrm or anything else just the fan thats on the adapter so any advice?

Its a 3900x 16gb 3200mhz about to order another kit of the same, a Gigabyte x570 auros ultra, and pny 2080 super blower. A 512 sabrent nvme. And 2 Samsung t5 2tb ssds in a 2.5 encloser that runs them in raid0. Case is the lian li lancool 2, and psu is evga supernova 850w. I plan on saving up and running a full custom loop with a 360 rad in the front and a 240 on the top

Definitely not a professional, just do some family stuff and goofy videos as well as some cad programs for my gunsmithing