Soupbowl

Has anyone checked out the app https://www.coveragemap.com ? I’ve been mapping my state and think it’s amazing. Community sourced map, upload prior speed tests and make new ones to show each other where coverage is.

Yesterday when I had powered on my computer it didn't post properly. It had the red VGA light that the b450 tomahawk (non-max) has. I have tried two hours of troubleshooting and cannot get the system to power on. The incident happened spontaneously, it was working fine when I powered it down the night before. I have reset the CMOS, changed the CMOS, unplugged all I/O, took all but one ram stick out, tried different ram kit, tried different GPU, tried different GPU slot, removed HDD, removed M.2, replaced M.2, using only one monitor (tried for both monitors), tried different GPU ports, reseated all connectors on motherboard AND PSU, tried different RAM slots, unplugged unnecessary PCI card. No overclocks were running on the system, and the only step it fails at is VGA. I have plans to go to the store and buy a new motherboard today, if I cannot think of anything else. My specs are: Ryzen 5 2600x Gigabyte RX 6600 8GB 32GB 3600MHz Corsair Vengeance RGB (running 3000 due to previous issues) MSI B450 Tomahawk (non-max, BIOS up-to-date) 650w 80+ Gold Corsair psu H100i 240mm AIO

I have a B450 Tomahawk (non-max), Ryzen 5 2600x, and recently bought an iCue commander core xt to sync up my other fans with my cooler fans. When plugging in the core, it will power the fans on it with rpm and lighting, but it will not show up in iCue software. My ram and h100i both show up fine in iCue, and I read something about the chipset not being able to deliver enough power through the usb ports on the motherboard that the commander core would want? Is this true? If so, what can I do? I really do not want to have to go through Corsairs support team again. I have tried seperate sata power ports to power it, but it still doesn't show. I did a clean uninstall of the icue software, and reinstalled a different version to it still not showing. I also tried the other USB port on my motherboard with no prevail. What can I do from here? Thanks. UPDATE: The daisy chain pins that I didn't have a cover for were shorting out on the case. Issue solved with electrical tape.

Yes, this is what the issue is. I am using it powered by a sata plug which is why it is getting power but it is not able to get data with the motherboard for some reason.

Hello, I have a B450 Tomahawk (non-max), Ryzen 5 2600x, and recently bought an iCue commander core xt to sync up my other fans with my cooler fans. When plugging in the core, it will power the fans on it with rpm and lighting, but it will not show up in iCue software. My ram and h100i both show up fine in iCue, and I read something about the chipset not being able to deliver enough power through the usb ports on the motherboard that the commander core would want? Is this true? If so, what can I do? I really do not want to have to go through Corsairs support team again. I have tried seperate sata power ports to power it, but it still doesn't show. I did a clean uninstall of the icue software, and reinstalled a different version to it still not showing. I also tried the other USB port on my motherboard with no prevail. What can I do from here? Thanks.

I am planning on getting a 980 pro or sn850, but I just wanted to make sure that it would work on a motherboard that only supports gen 3 speeds? More specifically, an MSI B450 Tomahawk (non-max). I have an sn750 500gb right now and do plan on upgrading my motherboard soon and putting it in as a secondary drive. Will something like an sn850 work until I get a new motherboard? Thanks.

Hello, I have an H100i platinum water cooler from corsair for a liquid cooler, and an MSI Tomahawk B450 as a motherboard. I never really used the MSI lighting until recently, but I cannot find how to sync it with the Corsair iCue. If anyone could help me that would be great, I'm not sure if it matters but the setting that my water cooling has is the Color Pulse. I just want to get that easy +20 FPS if ya know what I mean.

I have a custom built computer and recently upgraded from a 60hz to 144hz monitor. I currently have an XFX RX 560 gpu and it doesn’t cut it for the games I was play most frequently. I was wondering if there were any suggestionsfor a graphics card to put with the Ryzen 5 2600x that wouldn’t have a bottleneck at all. Thank you!

I have a custom built computer and recently upgraded from a 60hz to 144hz monitor. I currently have an XFX RX 560 gpu and it doesn’t cut it for the games I was play most frequently. I was wondering if there were any suggestions for a graphics card to put with the Ryzen 5 2600x that wouldn’t have a bottleneck at all. Thank you!

Hello, I have a gddr5 motherboard, but I was looking at the XFX RX 5500 XT 8GB and was wondering if it would even work in my motherboard?