BrendanW098

1) Ahh ok, I will try and get back in but atm its not outputting any display again. 2) I'm resetting the CMOS by removing the battery for ~10 mins as the motherboard didn't come with the jumper cap

I cleared the CMOS and once that was done the GOU outputted the display to press F1 to initiate setup or F2 to use default values, so I'm happy there's nothing wrong with the GPU. I went into the BIOS and left without changing anything and the issue is still persisting and I also cannot get back to this stage by resetting the CMOS again, as even when I reset the CMOS no display is being shown. I believe there may be an issue with the RAM being OC'd to 3000MHz but I can't get back into the BIOS to change this.

I don't no, I shall try to find another tomorrow to test if it is this.

That's weird, I will try and find another GPU tomorrow to see if it is that. I would be odd though since the GPU was working absolutely fine yesterday

I have just reset the CMOS by removing the battery for 3 minutes, still no joy. The system seems to boot, no lights are lit up on the EZ Debug, all fans spinning etc. but there is still no output to the display.

I haven't reset the CMOS itself, but I did flash the BIOS which should've reset the CMOS as Master Disaster said. I will try a CMOS reset on it's own though. I only have the one monitor and there are no onboard graphics so the only output can be from the GPU. I have tried plugging it into a known working TV and there is still no output. Have also tried a different HDMI cable.

Hi, my specs are: Ryzen 5 3600 - stock speeds MSI B450M Mortar MAX 2x 8GB Corsair Vengeance RAM @ 3000MHz EVGA GTX 1070 FTW Corsair CX 450M PSU 1TB WD Blue 240GB WD M.2 I built this PC yesterday and all was working fine. It POSTed, I went into the BIOS to OC the RAM to 3000MHz. Installed windows 10 form USB onto the M.2 drive. Installed all necessary drivers and then installed CSGO and ArmA 3 from Steam. All was working fine yesterday and the games were running smoothly and problem free. I powered up the system today, windows started up, I signed in and all was going well. After about 2-3 minutes, the PC shut down and the CPU EZ Debug LED was lit on the motherboard. Since then, the system has not started up, no display is being outputted from the GPU. The CPU EZ Debug LED lights up when turning the system on but does not stay illuminated. So far I have done the following to try and fix the solution: Reseated the CPU, ensuring there are no bent pins Reseated the GPU Reseated RAM Used a different PSU to power the system, incase of a faulty CPU power cable Tried a basic configuration with 1 stick of RAM (used both one at a time), CPU and GPU Unplugged both M.2 and HDD incase of driver errors Flashed the BIOS to the latest stable version from MSI Mortar MAX support page After this, the issue is still persistent. When powering on the system, all lights and fans spin that should but there is still no display output - there is no output to even get into the BIOS or access boot menu etc. The CPU EZ Debug light lights up when the system is powered on but this then goes off. Any help on this would be greatly appreciated.