MyNameIsWyatt

Yes, all with no luck. Even clearing the CMOS jumper wasn’t working. Starting to think it may just be a motherboard failure issues

Before that it had windows 10 and ran fine. However now it won’t even boot into anything. I hit power and 5 seconds later it beeps twice and the screen remains black.

After booting my Lenovo thinkstation S30 into Linux mint my computer is shot. The screen remains black and nothing comes on screen. My post code error lcd shows F2 and it sounds 2 short beeps. I tried doing a bios driver update from Lenovo help forum but I am still not having luck. Is there anyone that has experience flashing a motherboard bios to the newest release?

That appears to be the problem, only 1 of the 2 were spinning. Thank you!

https://photos.app.goo.gl/Go6aokh4448Vi5sD8 Sorry, here is a google photo link. Unable to paste an HEIC file into the post.

Hello, first and foremost I would like to state that my computer building and knowledge of PCs is rather low so please understand that this may be a rather "noob" question. I have recently built a entry level budget gaming/work PC with the following specs: CPU: Ryzen 3 2200G MOBO: B450M/ac RAM: 8gb (2x4gb 2666 MHz) GPU: Radeon RX 580 I just installed the GPU and was using the APU until this last week, so I was monitoring the specs of the RX 580 with HW Monitor. The case I am using is a Rosewill Ranger M with little to no cable management room so my insides are a hot mess (quite literally) as my GPU was clocking in at 85-90 degrees Celsius while playing. Long story short, my questions are as follows for anyone that may be able to offer guidance: -What is considered a safe range for GPU temps? I was only playing for about 20-30 minutes by the time it reached 90 -Does cable management effect my temp issues all that much in this case? Photo of my build for reference. -Would anyone recommend an open concept style case or a test bench case option instead? I am rather fond of the look of the test bench instead of a case but worry if that may not be safe or practical for a day to day use computer like mine. Thank you in advance! IMG_5191.HEIC

Do you know if there is a way to change this setting?

Hello, this is my first post and my first PC build so apologies in advance if I'm asking a stupid question! I recently built a starter PC: -Ryzen 3 2200G -8 gb 2666 Mhz -Asrock B450-M/AC No GPU, but CPU has integrated Vega 8 graphics. Device specs say 8gb installed with 5.9gb usable. I've found a few websites saying the integrated graphics are taking 2gb of ram and you can change the bios settings, but nothing is working. Am I doing something wrong? Thank you all in advance!