PV2smokes

Something like this. https://www.amazon.com/UGREEN-Selector-Computers-Peripheral-One-Button/dp/B01MXXQKGM/ref=sr_1_1_sspa?dchild=1&keywords=usb+switch&qid=1593197082&s=electronics&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzUEdUVkEwOEVVTFJFJmVuY3J5cHRlZElkPUEwMTY4MzI2MkxOTThRNU0yNzRaSyZlbmNyeXB0ZWRBZElkPUEwOTE0NDI1OUxaSVg5UkMxU0NQJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== Sorry for the long link, this is just a usb switch with a button on top to swap between machines.

Im still getting simular results and I use a wired connection.

600/25 and i am using the Chrome based speed test.

Hey all, For the last few days I have had an issue with my upload speeds being =/> 1Mbps with normal download speeds. I have tried resetting both router and modem, connecting directly to the modem. Even contacted Xfinity customer support all of which has yielded no improvement. Any suggestions would be greatly appreciated.

I did this back in November and did not have any issues, but i may be the exception. Its always best to create a backup in the event that it does not "cooperate".

Likely thermal throttle. Check to make sure your cooler fan(s) is/are operating properly. If they are then i would try to re paste the cpu.

Looks like GPU artifact, Contact the seller and start talking about warranty replacement.

Both of those are Tier A on the thread about PSU's. I would imagine either would be fine.

That may work, the idea of using a splitter is to have the fans match speed. But your system should be able to identify a second fan. What motherboard do you have and what header is the pump plugged into?

An AIO pump runs at full speed. If you want two fans to run at the same speed you need to use a splitter or a fan control hub.

Not a bad start, i would suggest a different motherboard something like a B450 Tomahawk and use the money saved there and a bit beefier power supply for future proofing.

Shooting in the dark here but maybe the power button might be stuck or there is a short in the wires between the power button and the MB connectors.

Make sure you have installed the correct drivers for your graphics card.

That CPU doesnt support higher then DDR4 2133, So upgrading the speed of the RAM likely wont help. You will see an improvement in loading times with the an SSD. I would invest in a new machine and ditch the current system.

Ryzen often has several restart cycles on the first attempt to turn on as it is training memory and such. How long have you left it starting up for?