Ignitros

I am looking at my next build project and have been contemplating small form factor with the NZXT H1. I was wondering if it is possible to retrofit an AIO water cooled GPU unit? Anyone with experience with this case want to chime in?

My son, daughter and I talked about buying a new gaming PC for awhile and finally decided to take the plunge. Rather than just spend a bunch of money on a pre-built we thought we would build it from the ground up. After a lot of discussion about what we would build and how we wanted it to look and perform we started at PCPartPicker.com (<---- this is the link to the build thread there) to make a parts list. We talked about the theme being Blood Borne but settled on Fallout Nuka Cola. With our parts list ready and theme imagined we started to plan everything else out. We could have just purchase the Nuka Cola case and motherboard that NZXT pre-built but we wanted a brand new look, the vertical GPU mount, we didn't like the motherboard features and the fact that it was only available for Intel CPU's as well as the cost involved. I ended up purchasing the same case from NZXT, the H710i because we liked the look and the vertical GPU mount option. I planned out the paint scheme and got started printing out the stensils, tore down the case and prepped it for paint. I laid out a base white then placed the stensils, sprayed gold and then sprayed red. After it was dry we de-masked it and placed the Nuka Girl decal and sprayed clear over all the paint. I laid out the stensils for the glass front cover and etched the Vault Boy and Vault-Tec logos. We then laser cut out some white acrylic with the Vault 111 and Fallout logos. I had Avery print us out some Nuka Cola stickers to cover the ones on the fans factory from Corsair. We also ordered a sticker from RedBubble for the reservoir that says "Half Lives Matter" I thought that fit the build style well. Lastly I purchased a Nuka Cola water bottle that we planned on using as the reservoir but the bottle plastic was too thin to risk drilling into and filling with any liquid without leaks and after painting the inside to mimic the blue color of the coolant (we thought we could just run the rigid tubing through it without any actual coolant inside the bottle and make it look like it was filled) it melted away from the paint so using it as a non-coolant holding part didn't work either. I ended up just purchasing a second bottle and using it as decoration. We got all of the parts together and fired them up test bench style to make sure everything worked and sure enough we had some problems. The Corsair Vengeance Pro RGB DDR4 3600 DRAM would not allow the system to post so we ended up swapping it out for the Dominator Platinum RGB DDR4 3600 also from Corsair and it booted right up also after re-seating the CPU just in case. After that was good we started getting everything fitted and placed into the case. Got the water cooling loop done. Bending the tubing was a first for us since we never did that before but Primochill was awesome for that part of the build. We used Primochill for the tubing, fittings and coolant. Corsair Hydro X for the GPU and CPU waterblocks, the 6 LL120 fans, (2) 360mm x 30mm Radiators and all of the RGB control via Commander Pro, EKWB for the pump and RadiKult customs for the 140mm fan shaped reservoir. We were originally looking at a 32" MSI monitor but decided that since it would also be used for the PS4 that we wanted something bigger. We ended up choosing a Vizio M558-G1 4K UHD HDR TV that we then mounted on the wall giving just enough room underneath for the as yet purchased sound bar (thinking Sonos PlayBar) for those times where we don't need to use the Corsair Void Pro Elite headsets. It was at this point I remembered we would need a desk to game at. Since I was doing a custom PC build why not do a custom desk build as well. I started there with Five 2x6 and cut them to 60" length, sanded them smooth and put them together with dowels and wood glue. We stained them black and laid out the seal coat of epoxy on them. We then placed the project on a flat surface that we sealed and covered with tuck tape to help it release once we poured the center epoxy. I mixed in some pearl white mica powder and poured a thin first layer in the center of the table. After that was cured we placed a mold in the center to block out for the surrounding edge of white pearl epoxy we would be pouring. Once cured we pulled out the mold and placed the non-working motherboards into the center along with 4 sticks of DDR3 DRAM then continued pouring clear epoxy till the entire surface was flat and covered. Last I routed the edges and gave them a scuffing to make them look frosted. I mounted the legs and routed out a channel on the underside for the RGB strips and placed an aluminum cover over to prevent light bleed. Once that was done we placed it in our picked out spot and started putting everything together. I think it turned out pretty darn good considering I have never made a table like this or built a computer from scratch before. I work at a place that paints large aircraft so paint was easy to get ahold of and it also helped with stensils and laser cutting the acrylic. The table was made a bit easier through YouTube and Stone Coat Countertops videos. In fact... I watched alot of videos from @Jayz2cents, @bitwitkyle, @Bit-Tech, @LinusTechTipsand many others to help me complete this undertaking! Of course my kids helped as well since this was a group effort and we all will now get to enjoy it! Parts list: AMD Ryzen 7 3800X 3.9 GHz 8-Core Processor Asus ROG Crosshair VIII Hero (WI-FI) ATX AM4 Motherboard Corsair Dominator Platinum RGB 32 GB (4 x 8 GB) DDR4-3600 Memory Corsair MP510 480 GB M.2-2280 NVME Solid State Drive Corsair MP510 960 GB M.2-2280 NVME Solid State Drive Seagate IronWolf 6TB NAS Hard Drive 7200 RPM 256MB Cache SATA 6.0Gb/s ST6000VN0033 NVIDIA GeForce RTX 2080 SUPER 8 GB Video Card Phanteks PH-CBRS_PR22 – 220mm PCI-E 3.0 x16 Riser Cable CableMod C-Series PRO ModMesh Cable Kit NZXT H710i ATX Mid Tower Case Corsair 860 W 80+ Platinum Certified Fully Modular ATX Power Supply Corsair Hydro X XC7 CPU water block Corsair Hydro X XG7 GPU water block 2 x Corsair Hydro X XR5 Radiator Radikult Customs 140mm Reservoir Corsair Commander Pro 6 x Corsair LL120RGB LED 43.25 CFM 120 mm Fans Primochill PETG rigid tubing and Rigid Revolver SX fittings Microsoft Windows 10 Pro OEM 64-bit

I got it to recognize. I changed everything out then tried clearing CMOS. That did it. Now I just have to redo all my overclocks that I didn't save. LOL

Hmmm... Is there anything in BIOS I'm missing?

I don't. I almost want to try and unplug the 2nd nvme storage and see what happens. Serious PIA though since I have the GPU vertical mounted and rigid tubing running through.

It did not work. swapped out to all 8 sata connections on the mobo. I also swapped out the cables just in case. This is a brand new drive too. I looked at ASUS website and it doesn't say anything about not being able to use both nvme slots and the sata so I'm lost. The HDD has power and I can feel it spinning.

I'll try that... brb!

Hey everyone! I have an Asus ROG Crosshair Hero viii mobo and I am using both nvme slots but I need to add a mechanical drive for extra storage. I have installed a Seagate 6TB 7200rpm sata 6 drive and connected it to the "A" sata 1 which is the top and forward most connection. I get nothing detected in bios nor in windows for the new drive. What am I doing wrong?

I'll try the voltage first then if that doesn't help I'll have to drain the loop and check the CPU. Someone also added that it could be pressure from the CPU waterblock... I don't think that is the case as it is only on there finger tight but who knows.

I'm really hoping that I don't have to drain the loop and check everything. I can it's just a pain in the butt. I'm almost positive it's not the socket but until I pull off the CPU I'll never know. Everything works fine though. Ran memtest with no issues with only the one dimm installed and CPU seems fine otherwise as well.

I read that I may need to bump the voltage for the DRAM? Thoughts?

bios v1105. Edited original post to include this info.

I recently completed a new gaming rig. I have anASUS ROG Crosshair viii hero X570 wifi mobo bios v1105AMD Ryzen 7 3800X4 stick kit of 8gb Corsair Vengeance RGB Pro DDR4 3600 memory (CMW32GX4M4D3600C18)2 Corsair MP510 m.2 NVME drives (480gb boot drive and 960gb game storage)Nvidia RTX 2080 Super GPUI can get the system to post with 1 stick of memory installed in the A2 slot (each of the 4 sticks will post in this config)When I install a 2nd stick in the B2 slot I get post code error 0D and cannot post to bios.Since all 4 sticks will boot while in slot A2 does anyone know what the heck is going on? I would assume that if all 4 sticks work while in that slot they aren't bad. Could it be something wrong with the mobo?Any help would be greatly appreciated.

It seems like all the pins are good and nothing in the holes in the pad itself. I'll drop it back in and see if it posts.

I've never installed an AM4 processor before and when doing so the CPU fits correctly it seems but there is a wiggle when pressing one of the corners. Is this normal? With Intel LGA they just go in and no play what so ever. The feeling is alot like a table that isn't quite level. I just don't want to bend any pins and ruin a $400 CPU. Any advice?