Abanoub Zak

I bought Redragon K550 RGB Yama and I can't find the software anywhere, please help.

Hello, I have a wired problem, here is my build. CPU: Ryzen 5900x MB: TUF GAMING X570-PLUS (WI-FI) RAM: Kingston Fury Beast RGB 16GB DDR4 3600MHz GPU: ZOTAC GAMING GeForce GTX 1660 Twin Fan PSU: Gigabyte P750GM Cooler: Aorus Waterforce x 360 I got Aorus Waterforce x 360 14 months ago, it was working fine till the last 3 months. 3 months ago, my cooler's display stopped working, and AORUS ENGINE wasn't able to recognize my cooler and the AORUS ENGINE was crashing. Every time I was turning off SVM (aka Virtualization or Hyper-V) AORUS ENGINE was able to see my cooler, however, the display was still black, till I tried to connect the cooler to the power supplier using a cable that only connected to my cooler. the old one was shared with 2 HHD. Finally, the display start working again, and I start to use GIGABYTE Control Center based on the GIGABYTE support team. Now, the second issue is still somehow present, whenever I enable SVM in BIOS, GIGABYTE Control Center doesn't report the correct Cooler FAN RPM, and it forces the fans and the pump to work on max speed. Whenever I disable SVM in BIOS, GIGABYTE Control Center reports the correct Cooler FAN RPM, and I can control my fan/pump speed. I need (Virtualization/Hyper-V) as my work as a programmer includes emulators and virtual machines, and of course, I don't want to leave my fans/pump at max speed all the time. Any idea how I fix it? P.S. I'm using the most recent drivers and updates.

Hi, two weeks ago a lightning stroke my satellite plate and 2 tvs and receivers were damaged on the tv was connected to a pc via HDMI cable later after fixing the tv I found that the PC Motherboard died and one of the internet switch port(the one that was connected to this PC via cat5) was damaged also. after that I found the main tplink route I’m using (archer vr300) which supplying all the internet with cables not reading the speed right (upload speed) normally I get 25-27 mbps of download speed and 3-6 mbps upload speed now I get 21-24mbps download but the upload speed is 0.5 mbps. I contacted with ISP and I forgot about the lighting so the technician tried everything even changing all the main cable for the landline but nothing worked. yesterday I tried an ADLS router I had long ago and the maximum speed for adsl router is 19mbps down/ 1.1mbps up and the for my surprise it can read the maximum upload speed which is 1.1mbps so my VDSL router(tplink vr300) is the problem as it read only 0.5mbps. so any Ideas how I can fix it and can the lighting strike effect something like upload speed and still every thing else functions normally even download speed?!!

for the pump I use pump header of course and It runs 100% yes at 4000+ RPM and 2000 RPM for the fans

I have 7 120mm Fans + 2 120mm for the AIO and the air flow is fine I can even feel the cool air at the back and upper fans. 3 fan in front with pull configuration + 2 AIO's fans on the Side. 1 fan with pull configuration in the bottom. 2 fan with push configuration on the top + 1 at the back.

Yes 3 times now in 2 days.

I have Ryzen 9 5900x with MSI mag 240R AIO In XPG Invader case. The problem is over heat, my CPU hit 90.3 to 93 in idle and 80 on Bios (Asus Tuf gaming x570-plus) btw latest Bios Update. No overclocking what so ever, also I get CPU overheat error on boot. I know that MSI mag 240R AIO is not enough for R9 5000 but 90C in Idle is insane. What should I do except changing AIO?

Hi, recently this year I build a new PC and with Ryzen 9 5900X but unfortunately for the silicon crises, I couldn't get my hand on one of the new Nvidia RTX 3000 series.(was aiming for 3080 btw). Actually I couldn't get my hand on any GPU, till i got GTX 1660. Anyway, most of my work is video editing and rendering and i needed to ask for ex:i use adobe after effects, premiere and media encoder. Now for the rendering part, which is better to use CPU or the GPU in my case? or I can`t even choose and the software will do it? Thank you.

Hi, I have MAG-CORELIQUID-240R in my build and when I upgraded to Ryzen 5 5900x I didn't think i need to upgrade the cooler. the problem now is my CPU hits 80~90c with little graphic work or gaming sometimes,Is that normal considering the summer time?! I use normal thermal paste from the market, Dose changing the thermal paste will solve the problem or i have to upgrade the cooler too? Thank you.

it`s just countdound wall watch on 1080P, bitrate 20 and GPU accelerator on...should I switch?

Hi, Not sure if that is the right section. I just bought a PC mostly for programing and video editing. PC parts are: Ryzen 9 5900x with MSI 240R AIO 16 GB ram (2x8) CL18 Asus x570 tuf gaming plus Samsung 970 evo plus 500GB Finnaly my bisgest shame (ZOTAC GAMING GeForce GTX 1660 Twin Fan) I was planning for an RTX 3080 for it but unfortunately could not find any GPU at all out of prebuilt,after waited 3 month and couldn`t find any I had to get the 1660 and it was overpriced too. now is it normal to render a video from "After Effect" that one minute long on these parts in 1 hour 40 mminutes? Same video on my laptop which was old and slow (3gen I5, 8GB, Readon 7670m) take 6 hours and 40 minutes, So does it make sense?

I`m aware of the CPU an GPU thanks, I just needed more information about the PSU.

Thank you, as I really appreciate that you took some of your time to answer, but I`m also little disappointed for the news.

It looks like every one is busy with the holidays.

any tip!