jonny boi

I believe I have installed everything correct according to the manual. The manual says to connect the pump fan to the gpu fan header (which I cant since the gpu fan header is a 4 pin), or....you can connect it to the motherboard which is what I have done. Everything works as intended, when I change color it works, change speed for pump above 60 % it works, but no matter what I do I cant get it below 2000 rpm. Strange.....? I'm not the biggest tech man, but I do my best. I have also contacted nzxt support about this. Prob take a day or two before I get an answer though.

All the fans on my gpu failed and I couldnt afford a new good card, the 1080 ti is as good as a OC 2070 (af far as I've seen on several yt comparisons). Okay, will try through the bios, although I have my doubts since the fan connector is not connected to the gpu fan header. Which is prob also why msi afterburner cant change the fan speed. (the fan header that came with the kraken is a 3 pin and so it doesnt fit the gpu fan header).

I bought a kraken x62 and a nzxt gpu bracket. Everything installed and working except the pump wont go below 60% which is about 2000 rpm. Dont get it, I can adjust my deepcool rpm easily, but not this one. Is it a limitation of the sofware (my guess) and if so does anobody know a work around it?

Didnt work, same thing happens. I could also mention that the fans works correctly before booting into windows. As soon as windows is loading it goes full on retard.

So I bought a used pny geforce gtx 1080 ti 11gb, saved about 250 dollars. Everything was working fine when 2 months later one fan quit up on me. But since the cooling on the card was so good I wasnt big of a deal. Now about 5 months later another fan "broke" whhich left me with only one working fan. Now here the thing, when I say the fans are "broken" they aint acutally broken. They come on an off as they please as now the first fan that failed is working again. Anyway to the point, so the only working fan goes to full speed which I expected. However now the middle fan is working again and the two working fans are on constant full speed. I didnt know why, so I uninstalled the gpu drivers, msi afterburner, and did a clean install of the card. Turn on the pc and everything is fine, but here is the weird part. As soon as I start installing the latest gpu drivers the two working fans goes back to full speed. They are full speed no matter what I do all the time,then I uninstall drivers and everything works just fine, I install driver......boom airplane in my pc. I've tried with both the newest driver and the one I've been using which has been working excellent. Before anyone tells me PNY is a shitty company and all that, yes yes I know, but I bought the card because it was one the best gtx 1080 ti (when working) and the looks on the card is by far the best I've ever seen. Since there is no option to contact the company back in Asia (read so much about useless customer service there) along with all the time it takes since the card is out of production, I'm thinking about buying a nzxt bracket and smack a aio cooler on it. But before that I wanna hear if someone else have experienced this, if so did you solve it, and lastly is it possible to make a custom loop for the gpu only? (dont worry I have enough space with my in win 909 ;) Would appreciate any answers :D