Arnavut
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Posts posted by Arnavut
-
-
17 hours ago, knightslugger said:
depending on the AIO in question, it may have fan connectors on it already. Rad fans do NOT need to run at 100%. The pump probably should though... and again, depending on the AIO in question, there may be other solutions. I remember when i AIO cooled my 1080ti a while back with a G12 that the h115i has a USB controlled pump speed which also reported liquid temps and also controlled fans powered from the pump. Everything was controlled through Corsair's software and it worked pretty well.
I want to use a Corsair H75. I think my old H75 is not controllable via Corsair software
-
Hello everyone. I'm not good at English, so first of all sorry for that.
I'm gonna use a Kraken G12 and an AIO cooler on my GPU. I want to use the radiator on push/pull. In this case there are 4 connectors:
-1x Radiator
-1x 92mm fan
-2x 120mm fan
Also I want my gpu to control radiator fans depending its heat. So I decided to buy a Gelid pwm cable and a Silverstone fan hub. The question is, if I connect Gelid cable to my GPU and Silverstone hub to Gelid cable, can I use radiator fans, radiator and vrm fan efficiently? Someone said that the radiator needs to run at %100 so I should connect it directly to the motherboard.
Thanks in advance.
Connection of an AIO to the GPU with a Kraken G12, fan hub questions.
in Custom Loop and Exotic Cooling
Posted
Thank you for your replies. I just want know that, will the radiator work properly if I connect it to silverstone hub