Jump to content

thunderwolf7478

Member
  • Posts

    42
  • Joined

  • Last visited

Everything posted by thunderwolf7478

  1. So that wasn't it, new drive in old one out fresh install same problem.
  2. I wiped it fully once before and that didn't help it's a m.2 256gb I am going to try another sata ssd that I have laying around and see if I get the same problem and if not I'm going to buy a 500gb Samsung Evo, I'll let you know how it goes.
  3. Not on the laptop no. I only really overclock my desktop.
  4. Yeah so drivers didn't work. Haven't had a bluescreen but I got another hard crash today. I'm thinking ssd...
  5. after battling with the bluescreen for half an hour I finally got the intel storage driver on lol. Seems to be working for now but we will I suppose. Thanks.
  6. its bluescreened 3 times while trying to start up support assist to detect drivers so
  7. Yeah it was done and working for a couple weeks before I did this windows reinstall
  8. Good point drivers would probably help duh. I'll install those right now.
  9. So I have a 15" dell g3 with a 8300H i5, 16gb ram(up from 8gb stock), gt630 and a gtx 1050 ti, and a 256 gb m.2 ssd. It was giving me some weird troubles in windows which was the dell g3 specific instillation (I found it was my error after the fact, had to go into cmd and activate the admin user) and I decided to reinstall windows with a fresh instillation. No big deal. So I pull the ssd and put it in my tower and wipe it. No problems. Put it back in the laptop and install windows, nothing weird other than a couple black screen half second flashes which I dismissed as windows looking for drivers for the integrated graphics and dual dedicated cards. I went about the usual installations of steam, discord, chrome, etc. Everything went fine. Was using youtube for a couple hours and it then bluescreens (windows needs to restart blah blah) and I'm like um ok thats a little weird and about half an hour later it did it again then a little while after it hard crashes. Black screen, loud static from speakers, the whole nine. (this was about a year and a half old windows instillation disk (usb) so I made a new disk and tried that. Nothing wrong then a couple hours pass and I get a hard crash again but this time it is bars of black probably about 16 of them in equal widths over my desktop which is locked. Am I correct in thinking my ssd went bad somehow? I haven't tried to reseat it but I will soon after I post this. I do have a console pc/test bench that I can rob an sata ssd from to test too. I also couldn't find the dell g3 specific windows online just a generic dell one.
  10. I have an original Xbox one 1tb with my gameshares and games and whatever on it. I also have an original Xbox one 500gb. I was wondering if anybody has swapped the drives between two and has there been any issues? There shouldn't be but before I tear into them I would like to know. Microsoft doesn't like it too much when you swap out hardware so. Before anyone says it the 500gb one is screwed into a gun case and modified to fit and work with a monitor in the case (basically just a portable Xbox) and the 1tb hasn't been touched. I want to have the 1tb drive in the case be my main and travel one and use the 500gb drive in the stock one for other stuff.
  11. Reseated the CPU (which I did not touch) and that worked somehow.
  12. Everything worked perfectly before. Ryzen 7 2700 with a modest oc to 3.8 GHz Msi rtx 2080 Asus prime x470 pro 32gb 3200 MHz ddr4 Evga 850 1tb Samsung SSD Nzxt kraken cooler Etc.
  13. I swapped out my Rx 580 with a new rtx 2080 (unplugged and everything) and now it won't boot with either card. Any suggestions before I rip everything apart?
  14. I was trying to find out if the board had a bios speaker but if it does no errors at all. Tried unplugging the gpu because the ryzen chip I have dosent have on board graphics, nothing. We're almost to 3rd gen ryzen I don't think it would need a bios update to be compatible with second gen... Another detail is the fans connected to my Nzxt kraken are running normally and the ones connected to the motherboard are running at 100%
  15. Every part in the pc has been working with another motherboard (b350-f). This new motherboard I got (Asus prime x470 pro) seems to be the issue, but everything spins up and keeps spinning. The parts that matter are: ryzen 7 2700, Samsung 860 Evo 1tb, rx580 (underpowered I know I'm buying a 2070 super when they launch), 32gb 3200mhz ddr4, Asus prime x470 pro. All of this worked in the other system. Is it that the motherboard is dead or could it be something stupid that I haven't thought of yet.
  16. Im talking brand new threadripper board for 300 and a brand new chip for 300 on amazon https://www.amazon.com/PRIME-Threadripper-Motherboard-Lighting-Printing/dp/B074HC93RX/ref=sr_1_fkmrnull_1?crid=249EOU0LGAW10&keywords=threadripper+motherboard&qid=1555861349&s=gateway&sprefix=threadripper+motherb%2Caps%2C146&sr=8-1-fkmrnull https://www.amazon.com/AMD-Threadripper-24-thread-Processor-YD192XA8AEWOF/dp/B074CBJHCT/ref=sr_1_2?keywords=threadripper+1920x&qid=1555861397&s=gateway&sr=8-2
  17. could also go for a 12 core threadripper for about 550 with the board and cpu
  18. Thats an option too, im not really set on switching over its just that right now the blue side has faster high end chips, but, ryzen 3 Im thinking will be very impressive
  19. it will be 250-300$ more to do that for minimal performance gain
  20. Thats the other thing, when I get a new motherboard I will most likely switch to intel
  21. It would be a few hundred more to do that so this will do for now.
×