FeTix

I cannot even get it into to the bios with the GPU in doesn't seem to want to display anything at all...

@Likwid what would it be called in a Dell Optiplex 3010s bios? Couldnt find it myself.

It won't even go into bios with it

Nah none of my mates have pc

Bought a used GT 1030 for my Dell Optiplex 3010 SFF system. Put it in and plugged hdmi into the GPU and no output, plugged HDMI into motherboard still nothing. Then removed the GPU and I get output from the motherboard. Tried turning on Legacy Support stuff in the bios and nothing. Took out the battery on the motherboard and held power on button for 5 seconds and put the gpu back in and left it for 10 minutes and still no display. Did I get sent a fault card or is there anything else I can try before getting pissed at the seller?

Can i get a 4 pin to 3 pin cable and use it ?

Ive got a pwm cable running from the fan hub to sys_fan1 on the mobo. The fan hub ive got converts a PWM signal to voltage regulation. Would it be because i havent got a fan/pump plugged into the main 4 pin white header? As it says that you need to plug your cpu cooler into the white 4 pin...

Im using molex to power it.

Current setup: ive got the fan hub pwm cable to sys_fan1 but i cant control any of the fans (I only have my case fans connected to it and none in the white 4 pin header) but for some reason i cant change the speed of them (it says theyre at 0 rpm), if i plugged the fan hub pwm cable into cpu_opt and put one of the fans into the white 4 pin header will it recognize it and ill be able to actually use a fan curve on them instead of them all being at 100%? Fan hub: https://i.imgur.com/JFrqGWx.jpg

The pump is going into CPU_FAN and there is another cable coming off the H100i for the two fans

which fan headers? Im using sys fan 1 and the cpu_fan

But the splitter isnt plugged in it just comes out of the h100i

So just keep the pump by itself in cpu_fan then the hub into cpu_opt then one of the h100i fans into the 4 pin header so it can know a speed then al the other fans just into all of the 3 pins slots Ive recently upgraded to SP120 RGB fans for my h100i cooler and plugged them into the splitter coming from the H100i (i did notice that the stock h100i fans are 4 pin and my new ones are 3 pin but i heard elsewhere it doesnt matter they will still change speed) but ive tried changing the speed of them via icue how i could before i changed fans and they dont change speed... Anyone have any idea?

This is my fan hub https://i.imgur.com/JFrqGWx.jpg if i unplugged the h100i pump cable from cpu_fan and plugged it into the white header (4 pin) on the fan hub and then plugged both of the fans from the radiator and the case fans into the fan hub and then had that cable at the top left plugged into either cpu_fan or cpu_opt should the fans all change speed depending on the cpu temp? Specs: Gigabyte Z170x Gaming 5 Corsair SP120 RGB NZXT Noctis 450 Fan hub

thinwalrus my fans are not PWM but the hub is?