I was trying to install liquid remix but ended up messing up one of the steps. Now it boots up to TWRP, but no touch is accepted as an input. To be specific, I followed this guide until I got to this step:
Flash TWRP Image File
Now you're ready to flash the base TWRP image file. The tricky part here is you want to flash TWRP to the inactivepartition. In other words, the opposite of the value you received in Step 6 above.
So if your active boot slot was "A," enter the following command to flash the TWRP image to slot B:
fastboot flash boot_b twrp-3.2.3-0-mata.img
If your active boot slot was "B," on the other hand, enter this command to flash TWRP to slot A:
fastboot flash boot_a twrp-3.2.3-0-mata.img
Afterward, you'll need to set the slot that you just flashed TWRP to as the active boot slot. To do so, copy the following command, but don't hit enter yet.
Basically what happened is that I got slot B, but did not read carefully. Because of that, I made it boot_b instead of a. I noticed the error, so I entered the other command, making it flash twrp to both slots. Now what happens is that It boots to TWRP, but touch gestures do not work. I can still boot to bootloader, so there might be hope for it. I know this is probably a lost cause, but can anybody tell me if anything can be done?