Jump to content

Jaasskk

Member
 View Profile  See their activity

  • Posts

    46

  • Joined

  • Last visited

 Content Type 

Everything posted by Jaasskk

  1. Jaasskk
    i just tried that but it just beep 3 times, power cycles , does this 2 times more and then just boots up, and in CPU Z i see the timings of the Higher RAM
  2. Jaasskk
    Yeah i tried that... its actually running at the speeds of the faster module... do i need to manually change that ? i tried removing and reseating them and i did check they are in the correct slots
  3. Jaasskk
    So im running two different RAMs with different timings in my PC. one is 3000mhz and has timings 16-20-20-38 and other is 3200mhz and has timings 15-15-15-36. whenever i get out of the bios, i get 3 beeps twice and then a single beep and my pc boots up. in Task manager my Memory is showing 8.1GB as System reserved. what can i do to get rid of that ? do i necessarily have to get exactly similar RAM ?
  4. Jaasskk
    I currently have a single corsair vengeance 8gb 3000mhz running at 3200mhz in my system(stable). i wanted to upgrade and add another 8gb stick. if i get a corsair vengeance 3200mhz ram stick, are my current 3000mhz ram running at 3200mhz and new 3200mhz ram compatible for running in dual channel ?
  5. Jaasskk
    okk thanks a lot :)
  6. Jaasskk
    So I should just plug in my old AHCI hdd ? The controller mode is set to RAID, will it work ?
  7. Jaasskk
    I just set up an array with 2 128GB SSDs in RAID 0 and have a hard disk which I already have some data in. And I wanna add it back to my PC. What's the way to have it working without losing data ?(if there is any) when I was setting up arrays I saw a Normal mode along with RAID 0,1 etc. Will that erase the HDD ?
  8. Jaasskk
    I just set up an array with 2 128GB SSDs in RAID 0 and have a hard disk which I already have some data in. And I wanna add it back to my PC. What's the way to have it working without losing data ?(if there is any) when I was setting up arrays I saw a Normal mode along with RAID 0,1 etc. Will that erase the HDD ?
  9. Jaasskk
    okk bois thanks then the issue is prolly with the cpu makes sense thanks a lot
  10. Jaasskk
    So i wanna overclock my Ryzen 5 1600, on an Asrock B450 Steel legend, its already on 4GHz. i have a thermaltake ux200 cooler running it on 72 degress average in AIDA 64 with all boxes except local memory ticked. I am using a 450 W Corsair VS450 psu, also running an overclocked GTX 1050ti with 6pin power. When i use Ultimate performance power plan the pc has a tendency to crash in cinebench, basically doesnt even restart just a black screen appears. and doesnt turrn off. Could this be the CPU instability or is it That the PSU isnt capable of handling this much power ? edit- Hardware monitor shows it sucking about 100-110 watts in Cinebench.(The processor)
  11. Jaasskk
    So theres this sale going on, and I'm getting 3200 mhz 8 gb hyperx fury (HX432C16FB3/8)very cheap. I already have a corsair vengeance 8gb 3000 mhz installed.(CMK8GX4M1D3000C16). will these work well in dual channel ? At what profile will they run ?
  12. Jaasskk
    Yeah i had to lol the GTE v2 is too tall anyways so yeah thanks once again I got the thermaltake
  13. Jaasskk
    So, which should i get ? I don't care about lights or noise, i care about performance, which would be better in that case ?
  14. Jaasskk
    Try the new BIOS update, it says it increased the support for XMP
  15. Jaasskk
    It don't come with a backplate tho, so i can't get it, there are a lot of good options other than cooler master, but they don't cone with Backplates, like the Thermaltake and Antec ones
  16. Jaasskk
    Ooooh okkk
  17. Jaasskk
    Kayyy bro done thanks a lot
  18. Jaasskk
    Yeah thats why i was thinking bout the 410R, it comes with a backplate, and its wayyy cheaper than the 212, which is about 40usd converted, compared to 24usd for the 410r. These fuckers raised the price for the 212 cuz its so popular
  19. Jaasskk
    Okay the thing is i damaged one of the threadings on a backplate and now i have one of the corners ziptied to the mobo, so i wanted to get a cheap cooler, im getting already nice temps on the stock cooler tho
  20. Jaasskk
    Circle CC821- The 5 fan version
  21. Jaasskk
    Its hard to find in India man limited options here
  22. Jaasskk
    Its a Ryzen 5 1600
  23. Jaasskk
    Yeah i have A circle cabinet with 5 fans, 2 on the upper side and 2 on the front for intake, and 1 on the back for exhaust
  24. Jaasskk
    I wanted to know if upgrading from the stock spire cooler to the Cooler master H410R would be good ? I mean the CM 212 is great for temperatures but i don't know bout the H410r. Would it reduce the temps by like 6-7°c ?
  25. Jaasskk
    So the threading on my backplate is damaged and for that reason on of the screws wont go in, so i decided to keep my pc horizontal for like 9 months, and keep the cooler screwed in with just 2 opposite screws, will that suffice ? After that time im bout to get a new cooler anyways so the backplate wont be an issue then. I looked and the CPU temps and they are looking the same or maybe just 2-3 degress celcius higher. I think it wont be much of an issue unless i do real heavy workloads or serious gaming, which im not planning to do till that time either ? It will mostly be used for study stuff..
×