wcohen21

Thanks you

We got em, thanks so much guys

I do

Where would it be?

What do you mean numbers?

Yes. They are in the bottom right

Thanks a ton

What cable do I need to use, and how do I do this?

Trying to test build a system outside of the case. We are trying to booth with the bare minimum, here are the specs. 8700k MSI Z370-A Pro motherboard and one stick of Corsair vengeance DDR4 2400 we have made sure the pump for our Corsair aio is plugged into the mother pump header, the 24 pin is connected. And the 8 pin cpu cable is also plugged in, when we flip the switch on the power supply, the fan on the radiator doesn’t spin and it’s conencted, and the lights on the aio don’t light up, and the psu fan doesn’t spin, absolutely nothing happens, help would be appreciated

The three pin is connected to the 4 pin header labeled cpu fan, and the SATA cable attached to the pump is connected to the psu

Psu: Rosewill Hive 750S GPU: EVGA 1060 Ram: Corsair Vengence DDR4 AIO; Corsair H60 (new version) mobo: Gigabyte Z270P-D3

Friend is working on building a new system, we assembled it and couldn’t get it to boot, we tested the video card in a different system and it works, we tested the power suplly, and mother board all are functional, but when we even try and boot with the bare minimum we get nothing, no lights, no fan, no nothing. Is it a possibility that the 8700k is dead, or is it a memory issue( we have no way of testing it but it’s new Corsair vengeance memory). Would turning on the power supply cause the aio to start functioning and because it’s not connected properly could that be causing the system not to boot? Any and all help is appreciated

There is no confusion withe a 6x2 , the 4x4 connector has an eight pin on the other end that can fit in the psu, and in the cpu connector, but the 4x4 slot simply doesn’t fit in the cpu power connector, or in the psu, there needs to be square pins in the bottom two corners, but only the right 4pin has a square, the left is the six sided thing

Hey guys, I don’t really know what to do right know, and I thought you guys would know better then I would but here’s the deal, a pc my friend is building has a Rosewill Hive 750 Watt modular power supply, and a Gigabyte Z270P motherboard, and my issue is that the included Cpu power cable is a 4x4 that’s supposed to go into the mobo and an eight pin that’s supposed to go to the psu, ultimately the issue is that the 4x4 doesn’t fit the eight pin slot on the mobo, the eight pin side could fit the mobo, but then there aren’t any 4 pin slots on the psu. At this point I don’t really know what to do, do I need to find a new cpu power cable and can anyone help me find one? Or is a new power supply nessecary? Any help would be greatly appreciated, thanks.