PraneethMv

I just tried it with my laptop, it has sound by Harman/Kardon. With that the AVR did show "Multi Channel In" on it's display. It always defaulted to either Stereo or this virtual Dolby/DTS thing. I did play around in the Windows Sound menu on my PC, set it to 5.1 no luck. Properties tab on my PC shows that my AVR supports 8 channels and all the Dolby DD+/DTS:X formats. I'm not really sure if this is a problem of AMD. I searched a few threads on r/AMD and I think few people do have problems getting pure 5.1 out of AMD GPUs. Found no solution though. Edit: I have no idea how, just re-tried everything, reset sound settings, installed the Dolby and DTS apps from Microsoft Store and set it to Dolby/DTS for Home Theatre in Control Panel. It works! AVR shows DTS-HD MA when played through Windows Media Player (Win11), but for some reason Kodi does not output DTS. Anyway, will try to figure that out too. Thanks a lot for the help! 2 monitor thing works!

Thanks for the reply! This totally worked! I have separate audio going to AVR, basically the 2 monitor you setup you mentioned. However my AVR still only outputs virtual Dolby PLII/DTS Neo 6. At this point I'm not sure if it's the AVR that's the problem or my GPU isn't giving out 5.1. Thanks for the help though! Will dig around more in AVR settings if there's something I'm missing. I have enabled 5.1 from windows Sound settings, so I don't think there's anything left to change from my PC.

Not sure if the title describes the problem properly. Please feel free to move this thread if not posted in the correct place. I have a HT set up with Denon AVR-1713, TV and my PC as a source. Right now the whole thing is connected as PC>TV>AVR. Since the AVR is a bit old it does not support 4K HDR passthrough, hence using TV's ARC for sound. However I ran into a bit of an issue. TV does not send pure 5.1CH to the AVR so it defaults to one of the virtual surround programs (either Dolby PLII Music or DTS Neo:6 Music). I wanted to know if there is any way to send Video Out and Audio Out separately from my PC using two HDMI cables? I am aware that there are HDMI Audio extractors but they are pretty expensive (at least in Amazon India). PC has AMD RX580 which has 2 HDMI ports and the motherboard itself has one. So ideally I want it to be one cable to my TV for video and one cable to the AVR for pure 5.1 audio. Can someone please help me with this? or just say if this is even possible? Thanks in advance!

I had built a PC a couple months ago and for audio I hooked it up with Yamaha RX-V357 AV Receiver (5 speakers and Subwoofer connected to it). I used RCA to 3.5mm jack cables from Amazon Basics to connect my Asrock B450m Pro4-F to the receiver (using the Blue, Green, pink ports on the back). My receiver is set to 6Ch Input but the problem I'm facing is I'm not getting any output from Centre speaker at all. I tried the Sound configuration wizard in Control Panel and the Realtek Audio Manager too. (All drivers are up to date) This is my Realtek Audio Manager Screen: No matter what option I try, there's just no sound from Centre speaker. The speaker as such works because I tried using it as a front speaker. My last option was to buy a HDMI to RCA cable so that I can use HDMI ARC from my TV to connect it to Yamaha for 5.1 Any help appreciated!

Does anyone have this case - Argus E1? I have a problem with syncing the RGB stip in the front with the other components. I have connected the Molex power to my psu and the addressable LED connector to mb. I have Asrock B450M Pro4F motherboard with Polychrome Sync which works fine with my Deepcool Fan and the AMD cooler, except with the Case LED.

Wow, that was easy! Thanks!

Thanks! Will try out and let you know!

Hi! thanks for the reply. Can you point me to any guide/video on file sharing? A bit new to this.

Hi Guys! Okay, so I have a huge folder on my laptop (around 110GB) which I want to transfer to my desktop PC. Now I can directly hook up my laptop to the desktop through a LAN Cable. But since my desktop is connected to my Router (D-Link DIR841) via LAN Cable already, I wanted to know if there is any way I can transfer that folder through the router (Assuming I will also connect my laptop to the router) Any help appreciated!

Wow. Thanks man! That totally worked! Memory clock is now at 2000MHz. I'll try out and let you know the results

So I checked the techpowerup page and compared with my HWInfo and GPU-Z results, and there is a huge difference. My Min clock is 300MHz and Max is 1284MHz and the memory clock speed is stuck at 300MHz for the GPU!

Thanks! Games: I have a Seagate 500GB external hard drive, so GTA V and Assassin's Creed were on that, CS:GO is on SSD. There's no other file on that SSD anyway.

Anyone having RX580 8GB variant, can you post your TechPowerUp GPU-Z screenshot?

Yes. It is getting updated as I type. I'm sure it'll take a lot of time since it is a very old version. Will give you guys an update once it's done!

Yes. Seems way off to me too. Really not sure why that's happening. I installed the latest Drivers from AMD website yesterday, and today morning the display drivers crashed twice. Once while playing GTA V and once while browsing. Do you think this has anything to do with the version of Win 10 I'm running? Mine is pretty old, I had an ISO file lying around which I used. if I'm not wrong it is 1507. Any suggestions are appreciated!