Jansi

Would it be fine if the 3 120mm fans with the radiator were blowing out at the bottom? That would make it one 120mm intake fan at the front, 3 120mm outtake at the bottom, 3 60mm outtake fans over the IO shield aswell as the PSU blowing out Need more air in possibly? Could make the first 120mm fan blow in next to the front fan I also need an idea on how to make the GPU stand vertically. I would prefer if i didn't have to cut the back PCI openings (though i might have to)

Well it can be spray painted beige Or have you found one that already is beige?

What about something like this https://www.ebay.com/itm/3-5-All-in-One-Internal-Flash-Memory-Card-Reader-USB-2-0-Hub-for-Floppy-Bay/143454091934?_trksid=p2485497.m4902.l9144 And then find something else for the 2.5" bay?

Wait, are the ones you found smaller than this one?

Well i was thinking if i get a internetal USB hub, i might be able to make the PS/2 port at the front work, aswell as finding the drives with USB I have found an adapter to make them work with SATA, but those were just the PCB, not even in some form of case

I was thinking about the adapter idea, but i think it will be too much work, aswell as i want it to look amazing when taking off the side panel and an adapter will be too bulky. I've just measured and i there is no space between them, there can be 3 60mm fans over the IO shield. That should give a bit more airflow. Although i won't have them spinning that fast. They can be mad loud those smaller ones

Well my idea was having the AIO at the bottom blowing out. There is a fan in the front aswell the PSU blowing out up above. Hence I want to put in two smaller fans over the IO shield And BTW: The key door with the drive bays have a special place in my heart. It will not be touched

Hello! I'm working on a sleeper PC project. First ever projekt of this kind for me I've bought this old rack chassis. It's full ATX so the motherboard and PSU has their place. My ideas are: Four small feet on the left side of the case, making is stand upright like a normal case Painting the inside white/black Cutting holes for the 360mm radiator at the new bottom of the case (I have checked and i CAN be there!) Replace the old fan with a Noctua 120mm (Using the same filter) Replace the drives at the front. Only changing them to ones with a sata/internal USB connection (I want them to work basically) Spraypainting the inside black/white No changes to the outside aesthetics Cutting a hole for two 40-50mm fans above the IO shield (I need a bit more airflow aswell as i can't make the serial port ort the three connections that's already closed work) Add a 3rd drive at the front. Just because: why not? Any other ideas? I need somewhere to put my 2.5" SSD. I have no HDD in my system. I've got one NVMe M.2 SSD for boot and one TB 2.5" SSD I would very much like to be able to use my cablemod cables in my new build And I have two LED strips, where should they go? Again: I'm new to this so let me know if any of this is wrong Spellcheck this pls?

What about the combination though? Any good/creative ideas? Gotta fit the sleek look though ofcourse

So basicly a shiny gray?

My PSU also pulls 2x 8pin from one though? That's the cables that came with the PSU that does so

True that ?

Hello there! I'm thinking about getting some custom cabling going on. At the moment my PC looks like this. It's the 24pin and the two 8 pin PCI-E power cables i want to change up. I've done my best on the cablemod website, should i do anything diffrent? And what's the difrense between the Carbon and black? Seems the same to me? https://eustore.cablemod.com/configurator/#cfgload:5ca3c9af440cc6.35865319 And sorry for possible typos xD

Well in my cabinet the SSD won't be on display, and the cable management isn't worth saving at this point

Well, i have the 1TB SSD for games, can't get a TB M.2 SSD for the same money

Update: Motherboard is fine, 1TB SSD is dead Hopefully i can get a replacement, bought it under a month ago

Update: Used a SATA-USB3.0 adapter, HDD works fine but the SSD won't work at all, so neither SSD or HDD work over normal SATA but HDD works over USB Althogh the HDD and a normal USB stick won't work at the same time... Even tho it's one on 3.0 and one on 2.0... I'm so lost...

Didn't help loosening it a bit up

Mounting pressure? So if i losen it up a bit (Like half a turn) it might fix it?

My newly build PC worked fine about a week ago, but now when i installed a water cooler, it somehow broke all sata ports on the motherboard. The SSD worked fine before the install. Specs for the PC is: ASrock Taichi Z390 Intel i7-9700K Asus ROG ryujin 360mm 16GB RAM RTX 2080TI 850 watt powersupply Samsung EVO 970 M.2 NVmE SSD 256GB (Works fine with Windows 10 Pro installed on it) Samsung EVO 860 2,5 SSD 1TB (The trouble maker) The water cooler has a small storage space for the picture/GIF it can display, could that somehow corrupt the SATA firmware? I've tried all SATA ports on the motherboard, and i have tried with normal HDD's. I can both feel and hear the HDD spinning, but the BIOS does not detect anything on the SATA ports. I've also tried looking around the BIOS aswell as the motherboard manual to see why this could happen, but can't find anything on it. I know some SATA ports are disable when using the M.2 slot, but none of the 8 sata ports work. And i have tried going into BIOS without the M.2 installed, still nothing. Side note: The SATA controller is enabled in the BIOS A friend told me to update the BIOS, but does the BIOS really need an update because of a water cooler?

And i mean, with the RGB on the cooler - Sure i need a 2nd software for the RGB on the cooler, but i need that software anyways to upload a picture to it

Must admit i fell in love with the AIO cooler, that's why i chose it And the NVMe SSD is mainly for windows to boot faster, aswell for some photoshop work (Might add a HDD to store the pictures and stuff)

Are all compatible And are all those fans just plug'n play with ASRock Polychrome SYNC?

Can someone check to see if all these parts fit together? I'm aiming using 25.000 DKK as a max Already ordered a 2080TI - 10.000DKK https://gyazo.com/6a723f7058a159085ba0408f1b575111 Aswell as that, are there any case fans that look like the ones on the list but are able to use ASRock Polychrome SYNC? Thanks