GalacticLion7

Hello, Does the Gigabyte GA-H87N-WIFI motherboard support TPM 2.0 for Windows 11? The manual doesn’t mention any built-in TPM support or a TPM header for a module. Does that mean it’s not supported? Gigabyte’s article is not specific enough. Thank you.

It does, but I would like to connect my PC to my monitor through a USB-C hub. It’s just a USB-C docking setup with an external monitor and peripherals that I use for my MacBook Air. As Alex mentioned, I’m looking for the reverse, as I use a USB-C hub. That’s exactly what I’m looking for, except my graphics card only has HDMI. The article you linked addresses this in the end, but what I’m unsure about is whether it applies to my system, as it only mentions systems with integrated graphics cards for HDMI in that section, unlike mine. Edit: If it works with my system, does the HDMI to DP adapter also need to be bidirectional? Edit (2): I figured it’d probably work even if it did not explicitly mention, as I would just theoretically connect the HDMI out port in my graphics card to the DP in port in the card using an adapter. However, I’m still unsure if the adapter has to be bidirectional.

Hello, I would like to connect my desktop PC to my USB-C hub with a monitor and peripheral setup that I use with my laptop I go. However, my desktop doesn’t have USB-C. Even if I install a USB-C PCI-E expansion card, I need to connect my monitor directly to the graphics card in order to get the best performance, and connecting directly from the USB-C slot to my hub will connect my monitor to the motherboard instead of my graphics card. How do I work around this problem? Thank you.

Neither does the RAM and motherboard in the G10AC support XMP.

I am still facing this issue.

I just replaced it with a brand new one, but the issue still persists. What other things can I try before giving it to ASUS support?

I should have mentioned that the issue occurs regardless on which OS you’re booting to. I am using Pop!_OS and Windows.

Hello, I am having an issue with my Asus G10AC prebuilt desktop where each time I power on my desktop from when it’s shut down, it often turns on and off for a while before booting properly. The issue does not seem to happen often when I restart my desktop from the OS or UEFI. Oddly, sometimes replugging the plug in the process seems to make the desktop boot straight away. Could I have help fixing this issue? Thanks.

Hello, On my Asus G10AC prebuilt desktop, I get the message “FW Status Recovery Error” on the display for a few seconds each time before booting. The UEFI and OS seem to work just fine, though. If I recall correctly, this issue seems to have begun right after I disassembled and reassembled my desktop for maintenance. Could I have help fixing this issue? So far, I have tried reseating the CMOS battery and reinstalling the BIOS, but the issue persisted. Thanks.

Hello, I have a 2020 i7 MacBook Air that I use for productivity. If I ever decide to play video games on BootCamp Windows with an external display, what graphics card to use in a Thunderbolt 3 eGPU gives me decent performance? Preferably, more than 60 FPS at 1080p. The 2020 i7 MacBook Air uses the 1060NG7 variant of the i7, which also includes the Intel Iris Graphics Plus Graphics G7 iGPU, if that's any help. Please note that I am not looking for answers that tell me to buy or make a new computer without any other suggestions. Also, I don't mind any noise from the fans, since I will be using headphones. Thank you.

Hey, How do I refresh my IP of my Pritunl VPN? Thanks!1