UNDOYA

Ooooh! That D is too difficult for non-native speakers. ?

Thank you very much, I will check if it fits for mice.

Where could I buy this mouse pad appeared in this video? Video:https://www.youtube.com/watch?v=pLp51TtWFX8 At about 10:02 It has a logo 'moomfit xtreme'? But I can't find it at all. Would someone please tell me where to buy it. THX

I've checked all equipments about my CPU and water cooling loop,also discussed tempreture performances with other overclocking gamers.We could draw a conclusion that it is normal hitting 95 degree while running FPU bench,and normal hitting about 70 degree while running cinebench R15. If there was a delid failure or without delidding,the tempreture will hit 95 or even higher while running cinebench.That means CPU is much hotter running FPU than running cinebench.And dynamometer shows a 500W while cinebench and 620W while FPU which also support the result. As the youtube link above,that's really wired,prime95 at 5G,that's really insane.None of 7900X overclocking gamers can achieve or even know how he can achieve.MAYBE mesh frequency and voltage are different.

Indeed,I'm sure I have tighten the screws until I reach the end of the thread. Maybe I should check the block itself. I was using Corsair H100i v2 before this water cooling loop, but it had a worse tempreture performance.

They fits well.According to the link below,LGA2011,LGA2011-3,LGA2066 should be the same for coolers installation. https://www.intel.com/content/www/us/en/support/articles/000005928/processors.html

it is very hot indeed

yep,this is it. EK water blocks are easy to screw just right position on LGA2011 series platform,so low mounting pressure shouldn't matter.I'm thinking ahout bad liquid metal application,that make sense.

This is a overlocking video just about 7900X,der8auer achieved 5G@1.32V running P95 with a tempreture of only 80. I was confused.I have lower voltage,lower frequency,better cooling system,the tempreture should be lower instead of this sort of thing.

If it is NORMAL that a 7900X after delidding hits 95 degree Celsius while running FPU in AIDA64??? I need help! Here are some more details about my system. CPU:7900X MB:ASUS Rampage VI Apex Mem:G.Skill Trident Z RGB 3200C14Q-32GTZR GPU:GTX1070 Founders Edition SSD:Intel Optane 900P*1 Samsung SM961*1 Micron M600*1 4 SATA SSDs Network：Intel X540 10G network connector Overclocking details: 7900X@4.8G core voltage=1.22V AVX offset=3 Mesh@3.2G ucorevoltage=1.04V Mem:3800@15 15 15 32 1T voltage=1.43V VCCIO=1.02V VCCSA=0.95V CPU powerlimits were totally unlocked. Cooling system: ONLY FOR CPU CPU water block:EK supremarcy EVO X99 Radiators:EK coolstream SE 240 with 2 Nuctua AF 12x15 PWM fans@1400RPM EK coolstream SE 360 with 3 SCYTHE GT2150@1600RPM Pump:EK XRES-Revo D5 Case:INWIN 101 Delidding: Thermal Grizzly Conductonaut between cores and package. Thermal Grizzly Kryonaut between CPU and water block. TEMPRETURES! Around 28 or 29 degree Celsius in my room. Water temperature at abou 35 degree while running stress tests. IT HITS 95 degree Celsius while running FPU for about 5mins.It runs at about 4.5G@1.22V. While running cinebench r15,tempretures seems about the same but maybe a little little bit lower.Cinebench R15 runs at 4.8G@1.22V Power: About 600W running only FPU bench. Come on guys,show me if I'm failed while delidding.And welcome discussing the tempretures decreasing of your CPU after delidding