worldsiko

When i checked, pbo was already disabled and my ambient temp is about 20c But is there also another way of knowing where the problem is? Since reinstalling cpu coolers is getting really tiring

I couldn't find anything with cpu auto boost, only thing i could find is precision boost overdrive

I did it, but the temps are still the same, fuck I sadly really don't know what frequency my cpu was running when i was still running the wraith stealth I really dont fucking know what to do, it's really getting on my nerves. Could there be a manufacturing fault in the heatsink, fan or the installation stuff? Could it be my cpu that got a defect? I'm really considering returning the cooler but then i'm scared that its a problem witt the cpu or motherboard or case i dont know

oops, i accidentally used the wrong imgur link of the whole pc build, this is what i meant to put https://imgur.com/q9AsQeW (the bottom exhaust fan on the front is now a intake)

Blender 2.8 since has a feature to combine cpu and gpu for faster rendering, it puts them both to 100% That's what i always use. As for the rpm my fans run mostly, i'll have to check in the bios since speedfan cant find my fan(s) Edit: When the cpu's temperature is above 70c the fan runs at 100% speed which is 1500rpm (max speed of the fan on the cooler according to noctua)

I use blender scenes to put a load on my cpu since i render a lot in blender

https://imgur.com/f8Lkq1T The bottom exhaust fan on the front has been made into an intake, the top 2 fans are also intake, fan in the back is exhaust https://imgur.com/Sjjy2lU I am sorry for the low quality picture i was in a haste, but i hope it's enough Picture of spread after i took the cooler off the cpu Is there maybe something wrong with the spread maybe? Picture of spread on the bottom of the cooler

I'd not know how to explain how much paste im using but i do know it's not too little and not too much I have my msi b550 tomahawk on xmp profile 1, i do not know if that enables anything though and i do not know if i have pbo enabled i'll check And i have 5 arctic p12 pwm pst fans installed, 3 intakes and one exhaust edit: pbo is disabled

I've been using ryzen master like you recommended the whole time I've cleaned my whole pc before installing the cooler and with all the panels off like i said in a few messages above the difference is very minor

I am using a Sharkoon S25-W, it's not the best case for airflow but even with the side and front panels off the difference is only 1-2 degrees lower

Yesterday I bought a new cpu cooler, the Noctua NH-U12s because the stock cooler of the ryzen 5 3600 was way too loud and hot for my liking. So I installed the cooler, some annoyances but I eventually got it in, so then I went to compare the temperatures. The wraith stealth was average 80-85 on load, but the nh-u12s was also 80-85 and i knew that something was wrong, I reinstalled and reseated the cooler a few times, new thermal paste etc etc, but there was no difference! Does anyone have an idea why this is? The noctua cooler should cool much better than the stock cooler of the wraith.

It could be lighting up because the motherboard is trying to find a discrete graphics card, but you're using a igpu. I'm not sure.

Thanks for your suggestions!

Oops, forgot to name where i live but yeah that seems something for what i'm looking for although it is 10 euro's more in the netherlands, you got anymore recommendations? (doesn't matter if you link one from your country)

I've been thinking to get pci-e cable extensions for the cx550m because the gpu i have only needs one 6+2pin connector and my stock psu pci-e cables have two one cable, so that means that theres a spare 6+2 pci-e connector hanging out of my gpu which looks really ugly. So does anyone know cheap black 1x(6+2) cable extensions for my psu? And how long does the cable extensions atleast need to be? What i mean with that there's a spare 6+2 pci-e connector hanging out EDIT: Forgot to name where i live, i live in the netherlands