vyneta

Hi, I am not familiar with AMD Graphic Cards and now looking to buy RX 5700. What AIB card is good? In my country only several cards available now, such as: - MSI - RADEON RX 5700 MECH OC - POWERCOLOR - RED DEVIL RADEON RX 5700 - ASUS ROG STRIX Radeon RX 5700 OC - ASUS - TUF 3-RX5700-O8G-GAMING For me, the ROG is overpriced and I am quite interested in Gigabyte RX 5700 GAMING OC, should I wait for it until it available in my country? I also found SAPPHIRE Radeon RX 5700 XT PULSE 8GB that is cheaper than the ROG RX 5700. Is that a good card? Thank you.

Hi, Recently I bought AMD ATHLON 200GE paired with AsRock A320M-HDV Rev. 4 motherboard. I use the integrated Vega gpu. Since the PC will be used for office purpose, I intended to reduce the dedicated memory used by the gpu (default 2GB). However, in the UEFI configuration, the GFX setting can't be saved. It rolled back to the default configuration. I updated the UEFI to the latest version (Rev. 4 P2.30) but the issue still there. Below are the steps I used: Step1: Adjust Integrated Graphic Controller to Forces Path: Advanced\AMD CBS\NBIO Common Options\GFX Configuration\Integrated Graphic Controller\Forces Step2: Adjust UMA Mode to UMA_Specified Path: Advanced\AMD CBS\NBIO Common Options\GFX Configuration\UMA Mode\UMA_Specified Step3: Adjust UMA Frame Buffer Size to 2G Path: Advanced\AMD CBS\NBIO Common Options\GFX Configuration\UMA Frame Buffer Size\512 Does someone have any similar experience? Thank you

But why when I change the refresh rate to 24Hz, it still stuttering? So in this case, using display port will not helping?

Hi, I am working on a old rig, the specs are: CPU: Intel Q9650 Graphic Card: MSI GTX 760 4G Motherboard: GB EP45 DS3LR Memory: 4x2GB I am wondering why I can't play 4K video smoothly? The GPU usage is already at 100%. Does my graphic card doesn't support 4K playback? I checked NVDIA website though and it said that GTX 760 support 4K. I use 1080p 60Hz TV connected by HDMI, I tried to change the refresh rate on NVIDIA application to 24Hz but didn't help. Will it affect if I use display port instead of HDMI? Thank you.

Currently I use 120mm, I have 5 120mm from my old case, but I can only put 4 on this new case. 2 front, 1 rear, 1 top. I was planning to use 2 at the top but I can't. My budget will be around IDR 200,000 - 300,000 or 14-20 US$ for 1 fan.

Ok. Thank you for the input. Appreciate it! Yeah I also wondering if I can do that. Will that work? But since the case build quality is quite poor, I cant mount 2 fans at the top. Because it interfere with my CPU power cable. Usually I use www.tokopedia.com .

Thank you for the information. It actualy have a hole at the bottom for a grip to open the front side. I was just thinking to create a razer logo hole on the front using cnc machine, but not still not sure if I will do that or not ?. So I guess I'll go with static pressure, do you have any recommendation? I have very limited option here in my country. I can just think of either thermaltake riing or corsair SP.

I also thinking to drill some hole in the front case. If I manage to do that, do you think airflow fan will work fine?

Yes, correct. The intake hole is on the right side only, the gap between fan and front case is very tight. Edit: I am thinking of using: 1. SP: Thermaltake Riing 14 or Corsair SP140 2. AF: NZXT FZ140 *note: I am looking for Greed LED fan, because RGB pack is too expensive and without the controller I can't change the color. The case spec is also not correct, because front mount can only support 2x140 or 2x120. Because the case IO will be interfered if I mount 3x120 fan.

Currently I am using a cheap local made case Cube Gaming Wescov. Because I am waiting for some good case to enter my country's market such as evlov x or dark base 900 v2. I am looking for decent fan because I can use them in my new case later.

Hi I've been looking for a case fan to mount on the front of the case. I dont have any HDD mount on the intake side, but the front case is so tight and the holes is limited. Should I use high static pressure or high airflow for the fan? I found some comments about using high static pressure if I use dust filter on the intake as well. Thank you.

Hi, I am helping my brother with his old rig. Below are the specs: Intel Q9400 ASUS DUAL-RX460-O2G 4x2GB RAM DDR2 800Mhz Asus P5Q-PRO motherboard 700Watt PSU (dont know the brand) Kingston A400 240GB I did not OC anything from this rig, but it crahses wheneven I open Dota 2, but works perfectly fine when I run 3DMark Fire Strike and CINEBENCH OpenGL. Below are the changes I made when upgrading his PC. - I replaced the motherboard because the old one broke, I bought the exact same model which P5Q-PRO (second hand) - I upgraded the BIOS from v1104 07/31/08 to v2102 02/23/09, because it wont boot windows if I plug the RAM with Hynix chip - His previous graphic card was Saphire Radeon HD 4890 - I did clean install the windows - I installed the latest graphic driver from AMD's website What should I check to troubleshoot this issue? Thank you.

What about the sticker? should I remove it or leave it be? I even found someone using thermal paste on the nvme chip. ?

Hi, I have Gigabyte Aorus motherboard and it provides M.2 heatsink. I am planning to install samsung 970 pro on it, but the 970 pro comes with a long sticker on the chip. Should I remove the sticker before installing the heatsink? Or I can ignore it and install the heatsink anyway. On the other hand, when I tried to find the answer, I found that some M.2 heatsink (e.g. MSI's), trap the heat, instead of spread it. Does anyone have experience with Gigabyte's heatsink? Should I install it or no? Thank you.

I agree, too much red on the MSI gaming X, since my build will be mostly green. The other choices are too expensive in my country. I think I will go with the G1, because other than that are too expensive for 1080 and I can get cheap 1080 TI model with those price.