bhelmouth

Hi, im kinda new to led strips, so, i have IN WIN A1 case, im planning to change the rgb led strip to the adressable one. then i bought 5m ws2812 and tried to light it up with cooler master argb controller that come with ML120R since my its powered using sata and my mobo doesnt have any RGB header. but then only 48 leds that on. in this case, is the sata only able to power 48 leds ? or it just the controller limited to 48leds ?

Situation now. 1. default bios setting 2. DOCP setting for 3000mhz Ram temperature seems weird.. 65 jump to 75.

So in the end, Now this is my situation 1. Fresh windows 2. Default bios even memory at 2133 3. Changed my radiator fan kraken x62 to aer p 140 that come with the box that much air flow compare to before thermaltake riing plus 4. Changed themal paste to grizzly kyronaut Result Stable 65~70c with peak speed 4050 all core.. Every time the temp reach 64 it will directly go to 75 then drop again rinse and repeat, is there something wrong ? Gonna try Ram at 3000mhz

Now I run 4.175mhz with temp under 50 How do I push it to 4.20 and make it stable ?

It's really weird, I try the dual intelligent processor from Asus It run fine at 4200mhz just 69c. Do it need to reset it back and let xfr take care of the overclock or just let it run 4200mhz ?

It's the newest bios already, So today changed my radiator fan from thermaltake ring plus to aer p fan, it does run cooler now underload. Around 70c but it running slower.. peak at 4ghz all core

It's here in advance precision boost overdrive but it doesn't seems have the scalar, I saw a video on utube, ASRock taichi have the scalar option

There is no scalar option though

Thats great, how much temp u hv ?

What should I change in the nbio common option? And should I try the LLC 1 by 1 from level 1 ? Done changing the docp standart

Sorry I forgot, it's x470 Asus strix itx

I already change it to noctua paste, I forget the name.

Can't seem to find nbio settings in advance tab

Hi guys this is austin. uhm so, here is my spec. R7 2700x Corsair Dominator Platinum 2*16gb 3000mhz Kraken x62 Gtx 1060 Corsair Rm750x case h200i and few settings that i already mess around in the Bios 1. Soc 1.1v 2. Ram -> 3000mhz 3. Performance enhancer lv 3 4. Core Performance Boost -> enable 5. Ram Voltage 1.35v results : Stress test 4 hour, aida64 max 4.125mhz all core, at stable around 80c max temp is 87c ambient temp around 25c cause i mainly use this system for corona renderer. and the benchmark result is around 1:59, while in the user result board for ryzen 2700x the fastest is 1:43 i wonder if i could get a better result or more optimize or better overclock ? Note: im really new in overclocking area. please bear with me..

i would like to have the ram at 3000mhz though there quite a difference during usage between 2133mhz and 3000mhz. do you have any recommendation for starter that just start to dive to overclocking scene ? there many material out there, it just too confusing for starter like me. i usually just follow the easiest one...