Xeno_The_Gamer

I'm seeing a couple possible solutions. I'll check them out when I get home from work. I'll download and check when I get home.

I've tried googling as much as I can and there wasn't much of a result out there and seemed to fit and work with my issue. I'm not entirely sure as i've never used linux and have absolutely no clue how to even start on it. PCPartPicker Part List Type Item Price CPU AMD Ryzen 5 3600X 3.8 GHz 6-Core Processor $309.99 @ Amazon Canada Motherboard Asus TUF GAMING X570-PLUS (WI-FI) ATX AM4 Motherboard $242.25 @ Vuugo Memory G.Skill Ripjaws V Series 32 GB (2 x 16 GB) DDR4-3200 Memory $179.99 @ Canada Computers Storage Crucial P1 1 TB M.2-2280 NVME Solid State Drive $129.99 @ Newegg Canada Storage Seagate FireCuda 2 TB 3.5" 7200RPM Hybrid Internal Hard Drive $119.99 @ Amazon Canada Storage Seagate FireCuda 2 TB 3.5" 7200RPM Hybrid Internal Hard Drive $119.99 @ Amazon Canada Video Card Gigabyte Radeon RX 5700 XT 8 GB GAMING OC Video Card $539.50 @ Vuugo Case Fractal Design Meshify C ATX Mid Tower Case $130.65 @ Vuugo Power Supply Corsair RM (2019) 850 W 80+ Gold Certified Fully Modular ATX Power Supply $154.99 @ Corsair Prices include shipping, taxes, rebates, and discounts Total $1927.34 Generated by PCPartPicker 2020-01-20 02:39 EST-0500 I last ran a memtest when i first built the system with no known issues after replacing 2x8gb sticks with 2x16gb sticks (ran through twice to make sure)

Gigabyte rx 5700xt Sorry for being an idiot with everything.... I'm just incredibly new....

Good evening, I purchased the aforementioned GPU and noticed that the vram utilization seems locked to a maximum of 26% during timespy (non extreme) gpu test 1 & 2 (Verified using HWINFO). While I cant verify the current bios/driver version at the moment (I'm at work) as far as I know I'm currently on the latest build as per adrenaline. My questions are thus: 1. Could vram issues cause crashing and resetting? (Ie: full boot cycle) 2. Aside from using adrenaline is there an alternative way to ensure the correct bios/driver version for the gpu? (If so, please link in response thanks!) I have already put in a request for an RMA and will be shipping it this (monday) morning. 3. I have a static safe bag (MOBO bag), aside from that, and packing peanuts, what is the most appropriate way to ensure safe shipment? Edit: The set up crashes EVERY time I run time spy, a game open for more than 2 minutes or just using it in general (random crashing). Also, sorry if I am not very accurate in the descriptions and whatnot, i'm still a novice when it comes to building and may unintentionally say the wrong thing.

Cinebench, time spy, and a few others have been done. Cinebench completes with no issues. Pea sized drop of thermal compound. Latest mobo bios latests gpu drivers

@Mark Kaine I went ahead and threw on the wraithfire cpu kit that came with the 3600x, making sure to use enough thermal goop. Unfortunately i'm still running into the same issue. There are only a few more possibilities. It can't be PSU as the entire system boots and remains stable (even as I type this). 1. Bad cpu (which seems pretty far fetched) 2. Mother board may have micro fractures or may have been damaged at some point.

@Mark Kaine Sorry about that, still getting used to the site. I'll swap out the aio for the stock cooler when I get the chance and see whether or not that makes a difference...... Is there a way to check to see if the cabling is correct? (Ie: aio pump is on the right header etc etc) I, once again am new to the cpu building arena and want this to go well. And thanks for the compliment on the system build

I have returned. https://drive.google.com/drive/folders/1tgzB0CtevkgkOZ5_meXpkXf4w--OnJ7r?usp=sharing BSOD test results. If anyone finds something please respond!

I'm going to run a bsod test when I get home. Will update and post AS SOON AS I CAN.

So, I upgraded the ram, re-did the memtest.... watched the entire time (2 test cycles). Passed. BUT! I'm still having the same issue. Does anyone know of an alternatve tests that could potentially narrow down the issue?

Hi DB4D, This may seem a little silly, but could you possibly unplug the power cable, give it a good cleaning and maybe a blow out using compressed air? For some reason there is a small fan that helps keep the external brick cool and if it's not getting enough air it could be causing your issue. Id also recommend making sure that your console is in a well ventilated area with nothing on top or beside it, and once again, making sure the air intakes are clear and clean I had a similar issue that I remedied by having a fan blowing directly on the console itself. I ended up replacing the original xbox one with an xbox one x, but it still works.

Once again, sorry for the delayed response. I went ahead and ran a memtest at the request of a friend. Turns out, bad ram.... bad bad ram. I started the test at about 2 am, by 9 am it was still at 21%.

I submit this for review.... I don't know what else to do....

Sorry for the extended delay in response. I've cleared the cmos and made sure that the mobo bios is correct. Still having the issue.