Matthew-g

I have recently build a new system that consists of a 9900k H150i Z390 Aorus Master Corsair Dominator 3000Mhz RTX 2080ti RMX 850 V2 PSU Built and running fine for 4 Months with the Following BIOS Setting (BIOS Version F8) Vcore Normal 1.200v Offset -0.060v LLC Auto XMP Enabled Default Core Clock 50 50 49 48 47 47 47 47 I have noticed recently when I leave my system idle for around 10-20mins I come back to a Windows Login Screen Event Viewer says Power Kernal 41 but last night it happened 2 times in 1 hour with a Whea in event viewer that's I've not seen in there before yesterday. It's been running fine for 5 months.

I have been looking at the Fractal Meshify S2 and Phantek P600s. Would I see a difference by changing the Rad to in Intake? Currently I have a NZXT Phantom 630 with the H150I at the top as an Exhausts and with the 9900K and 2080ti Asus OC it does get a little Toasty. Intake 200mm Frount 750RPM on load 2x 140mm Bottom 1300RPM on load Exhaust 140mm Rear 750 RPM on load  360mm H150I top 1600RPM on load I am getting around 78c in RealBench 1 Hour Run Ambient 23c

Been trying to measure up, it looks like my GPU will just be touching the Radiator fins

I was looking at that case, Does the PSU shroud have to be removed?

I am looking for a Good Airflow case for a 360mm Rad at the front, Enough Clearance for the Asus 2080ti OC, Plus the case would be on the floor. My Nears store is Scan.co.uk

Update I have got 3 spare ML140 fans so as a test I have manages to fit 2 in the hood of the case temporally to see if there is a slight difference. I know the fan Motors are not inline but its a test. So far there is a 5c improvement and Coolant seems to be better. Room Ambiant is around 4c higher than yesterday aswell. I have set a custom fan curve to match trlhr 1600 RPM fans of the H150i.

Already Set to Performance on Pump and Fans I was only thinking of a Push and Pull config due to the Radiator is around 1 1/4 Inch below the hood. I am trying to find a good case be very limited due to the 360 rad

I have been thinking it is due to my case layout, My old 6700k was hitting 46C on coolant with a 2080ti.

I have recently built a 9900k System and I am after the Coolest Temps, I am no to bother about overclocking. Stock settings were hitting around 85c 1.27v I have undervolted with a -0.060 Adaptive with LLC Auto and hitting 76c RealBench Case is an Phantom 630 Fan Layout Intake 200mm Frount 750RPM on load 2x 140mm Bottom 1300RPM on load Exhaust 140mm Rear 750 RPM on load  360mm H150I top 1300RPM on load When stress testing I can barely feel the Heat Escaping the hood of the case.  Would getting 3 more Corsair ML120 1600RPM fans in Push Pull possibly resolve my thermals issues? Coolant Temps are hitting around 40 when gaming.

I have recently built a 9900k System and I am after the Coolest Temps, I am no to bother about overclocking. Stock settings were hitting around 85c 1.27v I have undervolted with a -0.060 Adaptive with LLC Auto and hitting 76c RealBench Fan Layout Intake 200mm Frount 750RPM on load 2x 140mm Bottom 1300RPM on load Exhaust 140mm Rear 750 RPM on load 360 H150I 1300RPM on load When stress testing I can barely feel the Heat Escaping the hood of the case. Would getting 3 more Corsair ML120 1600RPM fans in Push Pull possibly resolve my thermals? Coolant Temps are hitting around 40 when gaming.

@Metallus97 & @jones177 I am wondering, am I getting Insane Temps due to having the 2nd 8 Pin EPS connector in?

I was honestly thinking about getting an Air Cooler, I have seen some benchmarks and it does better that the H150I at stock and OC I am also thinking of getting a new case and setting the AIO up as an Intake, Just worried it will be a waste of time and money

I Built a 9900K System around 2 week ago and Stock Temps were at 89c in RealBench, I have Replaced the Paste with Arctic MX4 and that drop the temps by 2c. I have Undervolted the CPU Multi Core Enhancement Disbaled XMP Enable Vcore Normal Adaptive -0.060 LLC Auto Hardware Info Reports Vcore is 1.200 with OCCT Large Data Set Running and 1.188v when playing Battlefield V Hardware Inside my NZXT Phantom 630 Motherboard: Aours Master Z390 CPU: 9900K AIO: H150I GPU: Asus 2080Ti OC RAM: 3000Mhz Platinum Air Flow Layout Intake 200mm Front 750RPM 140mm Bottom 1000RPM Exhaust 140mm Rear 750RPM 360mm H150I Top Performance Mode 15Min Pass of Real Bench + Ambient is around 20 c

I am just using a H150i It currently holding at 76c during 3 hours in an ROGBench stress test but the coolant is hitting 49c

I have recently Built a new systems and seeing high temps at stock. Specs I9 9900K Aorus Master z390 3000Mhz Corsair Platinum Asus OC 2080ti H150i AIO Case Phantom 630 I have set it all up did my first stress test with ROGbench after 30min I was at 90c on the CPU stock settings Next day I re seated the AIO and replace the paste with MX4 re seated and got 88c I started to undervolt now XMP Enabled MultiCore Enhancement Enabled Vcore 1.14 Load Line Turbo Temps now Adia64 72c ROGBench 76c Case Layout Intake 2x140mm 1x200mm Filtered Exhaust 1x120mm 380mm Radiator Non Filtered