Allan_

So i just made a new build and when i tried to boot it for the first time, it won't post but all the lights for the GPU, fans, motherboard were on. At first i thought it could be some cable problem or graphics card problem but after some trouble shooting i discovered that the Ram sticks are the reason it's not booting. When i tried using my corsair vengeance 8x2 DDR4 from my personal build it boots up. I tried adding the sticks onto my personal build and realized that both the sticks work fine, except they don't work if they are together. This worked on both the system with both the cards. 1 8 GB DDR4 Vengeance card with 1 16 GB DDR4 HyperX = worked 2 8 GB DDR4 Vengeance card with 1 16 GB DDR4 HyperX = worked 1 8 GB DDR4 Vengeance card with 2 16 GB DDR4 HyperX = didn't work 2 8 GB DDR4 Vengeance card with 2 16 GB DDR4 HyperX = didn't work New Build Specs: Ryzen 5 2600x Gigabyte RTX 2060 ROG Strix X-470-F motherboard Hyper X 32 GB DDR4 Ram (16x2) 2x 1 TB samsung SSD Gigabyte B700H 700W 80+ bronze power supply NZXT H500 case Personal Build: Ryzen 5 2600x GTX 1660 Ti gaming X Asrock B450 Steel Legend Master cooler M240L water cooler Vengeance 16 GB RAM Corsair CX 650W 80+ bronze NZXT H500 case Don't know what I should do or try next, help???

Actual Legend!!!!!! it worked and i oc the chip as well so now i am at 3.2 GHz so happy right now, its been two years since ive seen my laptop perform nicely! also should i go back to the base speed considering what i just turned off? for now ill do that so just lmk if oc it again is safe? thanks alot again!

just checked, its also at 100% and for everyone saying put it on maximum performance mode its already on it soooo. Thats why i am so dang confused

LOL, just checked tho and its should be maximum performance

i doubt its that considering the laptop was plugged in and I've had this problem for over a year now , but just getting around to fix it now.

Did you check if your graphics card is up to date? every now and then my games would just run really bad and i would just know that theres probably a new update

So I realize that at idle the chip sits at 0.78 GHz but even in a game or during stress test it doesn't go up. When I boot my laptop up it pushes it all the way up to 2.59 GHz for about 10-15 seconds and then it goes back to 0.78 GHz and doesnt ever come back up. I tried overclocking to see if this would fix it because i have really good cooling and now it goes up to 3.5 GHz after booting up but then goes back to 0.78 GHz. Any advice on what i could try or what might be causing this? Thanks, any help is appreciated

Meng Wanzhou was arrested in vancouver and is facing extradition to the United States on suspicion she violated U.S. trade sanctions against Iran.

Well i am buying the one plus 6t the day it comes out soo i dont really wanna spend more money before i buy it so thats why i was wondering if there is any other method to force on the phone if that makes sense.

I dropped my phone one too many times without a case and the volume up rocker is stuck in the phone. My phone ran out of battery the other day and when i tried to turn it back on it directly goes into Android recovery mode because the volume up button is being pushed in at the same time. I wanted to know if there is some way around this. I tried forcing the volume button out but i don't think its possible unless I take the phone apart. Please help!

Update: Update: so I reconnected about all the wires and and now the mouse works and my old keyboard now works as well but my keyboard with leds still doesn't work. It could be driver issues, but i am just glad that my mouse and my old keyboard work now so thanks so much dude i really appreciate it!!!!!

well when i plug it to the motherboard the 3.0 doesn't show the backlit on the keyboard but performs the same (flickering) 2.0's on the motherbaord show backlit but still flichering. The front of the case both 2.0 and 3.0 flickers with the backlit also flickering

Well I dont have a multi meter and i really dont wanna buy one just for this especially after i spent around 2K on this thing.

Alright so I just checked to see if any cables are lose especially the 24 pin connector and everything seems to be properly secure, but there are additional wires that i havent connected yet but those are just the wires that i am not using like the pcie cables and extra sata cables and such. Does it look like i am missing anything?

Well I havent installed windows yet. Just saw the problem and was trying to fix it. Quick question, would it still be the motherboard even though i tried the front panel usb's ?