reb830
-
Posts
11 -
Joined
-
Last visited
reb830's Achievements
-
Need help upgrading from a 135g 2015 Razer mouse to a modern mouse
reb830 replied to reb830's topic in Peripherals
after looking at the article it seems like a lot of high quality mice are left out for lesser quality mice. I'm looking for a more technical explanation/help but I appreciate the help! -
Hello! I'm a complete mouse noob and have no idea what I'm doing. I've been using a Razer Ouroboros since 2014 and I'm noticing the excess weight is bringing down my performance in FPS games like CSGO. For example, it's hard to stop the mouse when flicking. I have quite large hands(21x11) so I liked the Ouroboros since I could extend the mouse. However I no longer palm grip so I don't know how much I should pay attention to length. My current grip uses the entirety of my thumb on the left side of the mouse and my ring and pinky finger down past the first knuckle on the right. The edge of the mouse palm rest fits snugly under the first pinky knuckle(MCP Joint)(on the palm side of the knuckle). Only the pads of my pointer and middle finger touch the mouse. What mouse+mouseskate combo should I be looking to get? What mousepad works well with it? I'm aiming for wireless and a much lighter mouse (40-80g). Control is an aspect I'm looking to be emphasized Thanks!
-
Crossing my fingers if I end up having to RMA!
-
It crashes on both 436.48 and 436.02. Is it fine to go further than a month back?
-
already did this, didnt work
-
I ran a heaven benchmark while using HWINFO to monitor the voltageds across my psu rails. The power delivery seems to be fine across all rails, however the gpu core voltage never hit 1V, GPU Clock hit a max of 1050MHz, and Mem clock didn't exceed 966.8MHz
-
To make sure CSGO wasn't the issue, i ran The Witcher 3 and used GPUZ to monitor clocks and temps. My 980ti mem and core speeds still looked like a mountain range. When I opened Afterburner and tried to apply a safe overclock (power limit to 110%, +30 on core +50 on mem) I immediately crashed to two colored screens. Is this psu not delivering enough power? GPU? I'm at a loss
-
I can try that, but the crashing happened before I installed afterburner. It will be a few hours till I'm back at my desk.
-
Yep, first thing I did. I also took out the gpu and tried csgo on integrated graphics. There was no crash(random colored screen on each monitor) that typically happens when the gpu under locks for too long. I had the idea of gpu sag(remember backplates are super heavy on 3 fan 980tis) causing the pci-e slot getting messed up. I switched what slot the gpu was plugged into. I played CS for about 1.5 hours and there was no crash, but the under locking continued.
-
Hello, Recently (last 2 weeks or so) my 980ti G1 gaming has started to underclock in CS:GO. I run CS at 1440p and instead of getting 200-220 fps, I'm getting frame drops in the 80's. GPU temps never exceed 54C. Using MSI afterburner, I've been closely watching my core and mem clocks. When I am away from my computer, it idles at 1152 core 3305 mem. This is on purpose. When i get into a CS game, the clock will jump to 1350, then fall to 600-800, then jump back up and so on.... This is only when I load into a map. Things I've tried: rolling back drivers ~ did not work but stopped the "crash to random colored screen" problem I was having re-seating GPU and power cables Running memtest and speccy overclocking to see if it would stay at a stable overclock checking if there is a memory sink I'm honestly at a loss... any help would be greatly appreciated. PC Specs: 17-4790k not oc'd 980ti G1 Gaming HyperX Fury 16GB@1866 MSI SLI Krait (Z97s edition) SSD Boot drive(CS is installed on this) Win10 EVGA Supernova G2 750w PSU
-
Hello all,I am currently running a Denon AVR-2802 with a pair of Paradigm Reference Studio 60v3's. I am bi-amping these speakers through the 5-channel stereo mode (FR,FL, SR,SL). I have a Mirage LF-100 sub-woofer that I plan to dual sub with the RPW-10.Now to the problem: The RPW10 powers on and off. When I connect it to my sub woofer pre-out(like i did with the mirage and it worked), the RPW has no sound. I then hooked up the speaker woofers to the RPW, and then the RPW t the Denon using speaker wire. The woofers worked, but the RPW still didn't output any sound. Pictures of the ports are attached.Any thoughts on how to fix? Thankshttps://imgur.com/a/jyuBt
