truejaz

Updating the drivers when the card is connected in HDMI solved the problem. The card is new from the store Thanks

Update 2: After the drivers have been updated the DP connection works. I guess that's all that was needed to plug in the card in HDMI and install drivers and update them and that's it Thanks so much to everyone for the help

Update: I reconnected the card and again did not get a display I disconnected the DP cable and connected an HDMI cable and it works!!!! I have a display now I just need to understand why the DP does not work

I do not have another computer with a strong enough power supply but I will try to check with my neighbor tomorrow morning (it's midnight right now)

I have already updated to the latest version

I'm not convinced the problem is with Windows because the card does not display anything including the BOOT process of the motherboard

Hello friends, I recently decided to upgrade my GPU and purchased the powercolor rx 5700 xt red devil To replace the old RX 480. I plugged in the new card and turned on the computer. The computer worked and even went into Windows I heard the "Welcome to Windows" sound, But without display at any BOOT stage... By the way it looks the card itself works when you turn on the computer the fans and lights of the GPU work The monitor is connected with a DP cable And I tried every DP Connection on the card and there is no display Things I've tried to do so far (That did not help ) 1.Complete deletion of video card drivers and softwareׁׁ(Used amd cleanup utility ) 2.I updated the motherboard BIOS to the latest version 3.I screamed into a pillow HARDWERE ROG STRIX X370-F GAMING G.SKILL FLAREX DDR4 2400Hz 8x2 ryzen 7 1700 rx 480 8g evga 750 gq Operating System windows 7 ultimate SP1 And I'm not sure if it matters but my monitor is a gigabyte m27q I would greatly appreciate any advice and help that would help me fix the problem before the 10th Update: I reconnected the card and again did not get a display I disconnected the DP cable and connected an HDMI cable and it works!!!! I have a display now I just need to understand why the DP does not work Update 2: After the drivers have been updated the DP connection works. I guess that's all that was needed to plug in the card in HDMI and install drivers and update them and that's it Thanks so much to everyone for the help

No but on the memories themselves it says it was designed to work on the X370 and RYZEN so I did not think it would be a problem G.SKILL Flare X Series 16GB (2 x 8GB) Memory Model F4-2400C16D-16GFX

This is a reasonable possibility but as I have already written I checked all the RAM separately and without and besides the LED of the DRAM on the motherboard there was no indication of the problem not even the beeps(MB Speaker connected) And as far as I know on ASUS motherboard When RAM is not found it should be One continuous beep followed by two short beeps And that's what made me think the problem is in the board and not in the memories ... I'll know for sure when the new board arrives

So I sent the board back to Amazon and the replacement on the way to me. I just hope that with the new there will be no problems because if they were I would lose my mind. Thank you all for your help

Fifteen minutes have passed and nothing happens If you have any other suggestions I'm all ears

I checked all the connections and the RAM was in A2 B2 , I leave it on for 10+ minutes and see if it works

Thanks man, I hope too

I appreciate your help, I will wait a little before I return the board. Maybe someone else would have an idea

I plugged in the speaker Of the motherboard and there are no beeps at all