Jump to content

Samboae

Member
  • Posts

    13
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Samboae's Achievements

  1. Good Day, I would like to connect a Netgear switch with a Harting switch via fibre optic. The netgear switch has a bandwith of 850nm and the Harting switch 1310nm. Right now I can not connect these two switches. Is it because of the different bandwith, or could it be something else?
  2. So I can operate the system with either 2 slots or all 4? 1 slot and 3 slots are not working? What is considered to be better? 2 or 4 slots?
  3. Good Day I have a question about the RAM support of the CPU i7-8700k I want to purchase new RAM for my setup I am running the above mentioned i7-8700k on a MSI Z370 A-PRO Mainboard. The motherboard has 4 RAM slots. On the website of the Mainboard you can find the phrase Dual channel memory architecture. In the CPU specs I see Max # of Memory Channels. Does this mean that this setup is only working with two RAM? Or is this a recommendation? It confuses me because the Mainboard has 4 slots.
  4. Okay Thank you. Didnt set it manually as far as I remember.
  5. Good Day, I am running on 2x 4GB DDR4 and plan to upgrade my system with 2x 16GB DDR4. Do I need to adjust the Voltage Supply in my BIOS settings in case the new RAM needs different supply? Or will the system do this automatically? I am planing not to use the old RAM at all anymore
  6. Good Day, I am running on 2x 4GB DDR4 and plan to upgrade my system with 2x 16GB DDR4. Do I need to adjust the Voltage Supply in my BIOS settings in case the new RAM needs different supply? Or will the system do this automatically? I am planing not to use the old RAM at all anymore
  7. Ok thank you for the tips. I think i will get a 1060 to fit in a sweet spot.
  8. Hey there. I would like to buy myself a new Graphics Card. I mainly play low requirement games like esport titles and guild wars 2 because i am playing AAA Titles on my PS4. So i am thinking about what graphics card to get. I had a look on the GTX 1060 but i am not sure if that is good or if there is a better one. Like RX580 but that one is too expensive due to mining Also... how much gddr5 ram do i need? Is 3 or 4 gb enough or should i get 6 or 8 gb?
  9. Actually the 6 pin i can not use because i have no gpu but the argument with blowing up the psu/mobo is good tho Then i will connect it with the 4 pin.
  10. I also have a 6 Pin PCIe Connector whats about that?
  11. Thank you for the quick responses i will try my best with 4 pin
  12. Hello all. I got a MSI A Pro Z370 MoBo and an i7 8700k now and i wanted to upgrade my System now. My problem is that my PSU just has a 4 pin CPU Power Connector but on my MoBo there is an 8 pin Connector. Would it work in general to power up my System until Shops open again the day after tomorrow or should i not try it? Greets and Merry XMas
×