PedMar

Guys! I want to know if the G versions (that include integrated graphic cards) perform less than Ryzen 1 or 2 series. I think I saw in one of Linus videos saying that non G versions perform better because they don't have to provide graphics performance. If you guys have a video or website that explains it better its a plus! Thank you!

I fixed it, since Im using a very old HDMI cable while my DP arrives I had to decrease Monitor freq from 60hz to 59.999hz and its now working. Holy shit I was so scared!

Not ebay, from a local forum here that is very reliable. I downloaded the latest from NVIDIA I was getting 200fps in Fortnite, over 100 in PUBG. I have a good case with cooling (previous card never went over the 75 and it was a 1060SC mini (1fan)

EVGA 1080TI FE

Guys this is happening with every latest game in fullscreen mode. I am using a cheap HDMI cable while my DP 1.4 arrives on tuesday. could that be the issue or I bought a damaged card?

Having this colors mean the card has some issues? Only happens with the game Radical Heights Well as I said my fan speed never goes over 50% So maybe with MSI afterburning allowing it to go max 80% will be better And only happens in fullscreen mode

is the MSI software better than any EVGA option? (If theres any)

Its a 1080ti prices for used here are over 850 and more i will not overclock and I always game with headset on so the noise does not matter How can I increase its fan speed?

Guys! What should be the normal temp in full load? And how to increase its fan speed as on the latest funmark test I did (for 2 mins) the temp went to 85 but the fan speed never increased over 50% (I dont mind the noise)

Guys, got one used for this much when other versions used tend to cost over the 1k. Ive read some comments considering the FE a bad purchase. Please advise! Edit: prices in my country (Colombia)

Im fine with OBS, any suggestion in settings for 480 stream then? Do I need to rescale or something?

Found the problem of my FPS loss, for some reason one 8gb ram module wasnt working, Re installed it and now I got 100+ FPS on pubg while recording at 1080p 60fps

Alright, what about at 480. And what about the losing massively fps when doing it.

Hi guys I need your help! I am a very good FPS player who have played for the past 20 years PC games. I want to Stream but I cant and I built a very good PC that gives me 100fps at PUBG. But I have two issues. 1st. Ever since I changed my HDD my FPS when recording drops to 20 (this never happened). Worth mentioning that I did not do a clean install of the new HDD, I mean I formated but I had copied the steam games and other files in order to save downloading time. So Pubg and other games were copy/pasted and configured on steam to be loaded. Worth mentioning as well that the old HDD was F:/ and the new one is D:/ 2nd and mostly the most important issue. (upload speed is 2mb) This is the most sad part for me, as for where I live we dont get another internet provider that has more upload speed, making my streaming in very bad quality. so I have the following questions. - I have two internet at my house, both with 2mb upload, if I upload at 2mb the image can be good but I will be lagging terribly in game. so my question is, can I have two internet in the same computer and stream with one and play with the other? this video shows how bad it looks when I stream from my main pc/internet - If not here is the second question. Can I have a low end PC connected to the second internet and stream through that one? I know a lot of streamers do have a streaming and gaming machine, so my question is what hardware do I need in order to fully stream at 2mb from that PC. Thanks very much in advance!!

Yeah, thought the same. Thank you very much for your follow ups.

I let the proOCDT_SM on auto as I did not want to risk it. Set up motherboard DOCP but changed voltaje to 1.35 and soc to 1.125v 16 passes full test on memtest gave me 0 errors. IDK if modifying that value and as well the (30-30-40-60ohm) values everyone seems to use

Yes it booted and Im now doing a full memtest with 16 passes. Its about to complete it’s second pass with no errors. it completed the 10 passes test 6 though.

I used DOCP profile but adjusted voltage to 1.35 soc is on 1.125v and it ran the test 6 10 times no errors. However it also ran at soc 1.2v. I guess leaving it at 1.125v is better?

Changing all that shit ive had gave me errors even on booting. I reseted default and maybe i will just oc the processor. Any guide or something? How much performance im losing on using stock speed ryzen and 2133mhz ram vs 3.7 oc cpu that was stable and getting the memos to work at 3000mhz

I was advised to use these manually settings (except the tRFC) on 1.2 SOC Voltage with Ram at 1.35v

Hey guys I need help!I have these http://www.corsair.com/en-us/vengea...00mhz-c15-memory-kit-black-cmk16gx4m2b3000c15 on an ASUS ROG STRIX B350-F Gaming.I tried to use the auto DCOP configuration and it had the timings right and even the voltage (on the title) however it was setting the DRAM Voltage to 1.4 and it was displayed in purple font color, this was causing me to get the same BSOD video_scheduler_internal_error almost instantly after booting.So I decided to manually set it up choosing 2993mhz speed and manually setting timings and voltage on 15-17-17-17-35 and 1.35v respectively with soc voltage set to offset mode + 0.01875 and it displays at 0.825V. I also changed the procODT_SM to 48 ohm and that's it.However when using multiple software I'm getting a BSOD video_scheduler_internal_error so I did a memtest with 16 passes (that is still running and right now it has 1.336.033 errors found and what I can see on the screen says TEST 3 ADDR (different codes) expected 0000000000 actual FFFFFFFFFF CPU 3My GPU is an EVGA GTX1060 SUPERCLOCKED that I have not touched at all.Should I stop the memtest and change something? UPDATE: The errors were all in test 3 after I stopped it in pass 10/16 I tried only testing the ram using the test 3 and it did not give me an error. I now have decreased speed to 2133 mhz with the rest unchanged and Im doing a 6 passes memtest. I dont have much time to do very long tests