Paingamesyt

I forgot that its been a month since last video "$1500 PC Secret Shopper 3 Part 2" Is this cancelled or they are late with Part 3?

Update: 4/5 saved battery BABY ^_^ I have been charging them yesterday for around 5-10min on a charger that i dont 100% trust for safety reason But it did charge them and they hold voltage to 3.5v (They was 2.48v and charged for 5-10min) So i can say this experiment was succesfull 18650 battery in my country cost 5-7euro ( 2.600mAh unknown brand) but these are LG Cells and they are 3200mAh, they are OLD and probably they are not in great condition but why do i need to throw them when i can use them on something Thanks again to this community and to Mariush for information and help

Thanks for info, this is too much techinal for me to understand it But just now i did search info about 18650 battery cells and they say: "The minimum voltage for NMC 18650 batteries is about 2.5 volts. A BMS will actively work to prevent a cell from going below 2.5v by putting the battery pack into safe mode. Any lower than around 2.5V, and irreparable damage in the form of lithium plating will occur within the battery. If your cells run lower than 2.5V for a short period of time, then the amount of damage that happens is minimal. If, however, they are left that low for a long time, it can totally destroy the cells." so this means that if battery is bellow 2.5v long time then that can damage battery cell and i dont know how long these batteries was 2.48v This powerbank was last charged 2y ago and just now i decided to disassemble it and see if i can save some batteries. I will try to charge them at least near to 3v and wait for this charger to arrive: https://vi.aliexpress.com/item/32799915099.html?spm=a2g0o.cart.0.0.361738dazFFfwA&mp=1&gatewayAdapt=glo2vnm I have some charger but i dont trust it, so i will charge battery for 15-30min and leave battery and charger outside just in case it happens something. I think this LittoKala is good so till that arrive i will charge them to 3v

Hello guys I did post 2 days ago on how to safely remove 18650 battery from Xiaomi power bank that had broken charging port and i did remove tham thanks to this great community and also thanks to member @MANIKYATH for the help Now i wanted to know what is DEAD 18650 battery, what is MINIMUN VOLTAGE to be called DEAD and what are SAFE voltage for this battery? Also i want to buy some charging device for 18650 and use these batteries for some devices that uses 18650 Its great if can someone recommend charging device from aliexpress here are pictures from EX-Power bank You can see on 1 picture that 1 battery was almost exploded, this was not by me, it was i think manufacturer error, 1 battery was not properly connected, on - side it was disconnected from 2nd battery and did not properly charged or discharged. This powerbank was used almost 7 years and thanks God did not explode or catch on fire These are LG cells and i think thats why they did not catch on fire. On these 2 picture i did test battery voltage. 3 batteries had 2.48v (these are 3 batteries that was together) but one battery had at first 3.07 voltage but later it jump to 4.16v (This battery was supposed to be connected with swallowed battery but did not) i dont know how this battery was not damaged, because minus was not properly connected with 2nd battery. To properly charge or discharge there, battery need to be connected at - and + PROPERLY but on these 2 battery it was not properly connected But most importand, at least 1 battery is saved thats worth trying

Hate to throw if i can salvage cells, i can use them in something. Not DIY but they can be usefull, Does this mean i go first + to cut then - The battery have 2.7v so i think it will nothing happen Also do i cut the 3 connection where are 3 battery connected at - side. On this type of powerbank, 3 battery are separetad from these 2. (i think that on this board it have 2 plus and 1 minus) Plus is on side where is charging port, that plus is for 2 battery that are connected and top 3 battery are separetad. I think it is Anyway thanks for info Love ya

I have old powerbank from Xiaomi (16,000mAh) but it's broken charge port and now i cant even use it. I want to remove battery cells and use it on something else. Now how do i safely remove them without damaging battery cells or worse, catch them on fire Here is the battery that i have and plan to remove battery cells:

I have old Lap-Top Dell 3537 with Intel i5 4400u that have damaged display, it have some strange circles that appears on its own. My original Display model on my Lap Top is: LTN156AT30 and the one that i have found is LTN156AT27. Can i use this display as replacement for my? is this LTN156AT27 same as mine? Here picture of my display

I'm using default settings on Crystal Mark, if they are using different options than its not my problem.

I have just now requested partial refund, the NVME is working so i don't need the hassle of returning something thats cheap. It will cost more shipping to china than what this device worth :). Anyway thanks for reply, i knew that its impossible for a drive that have windows installed to have impact in perfomanse. Even if its true what seller is saying, then read speed will also have impact. So this is faulty by factory. I did see review that almost everyone has speed as advertised. I love to buy chinese brand, i know they can be scammers but thank God that aliexpress have good protection so almost always aliexpress is in on side of buyer

Hello, I have bought M.2 NVME SSD from chinese brand and writing speed is not as advertised. Now seller suggest me to do test while NVME is empty and for me thats strange. Now, my question is. Do you test while drive is empty or you can test that drive while there is windows installed? I have still buyer protection so i can recover some money but do i need to format drive and test it while its empty to prove that NVME SSD is faulty or i can test this drive while its installed windows 10? Edit: Forgot to add Drive is 324//476GB, its formated to NTFS. And here is what advertising speed is and what my speed is. You can clearly see its huge diference on writing speed

Yeah, ofc i plan to use bios update inside bios My darling AKA Tomahawk died because of bios and now i want fail safe in case this dont happen again

I just need to know can you recover bios with Q-Flash. I did read on internet that its not 100% success but if its 1 out of 10 try success then i'm fine with this. My last MB did go because of bios and i want to have a little less stress with knowing i can recover bios if something goes to hell.

Did buy MB with this option so i wanted to know can you recover bios in case power outage goes off while bios update. Is Q-Flash Plus intended for recovery bios in case something happen while updating?

In my country i cant find 5600 only 5600x or g... Very sad, i can go for used but i want new with warranty I'm in Montenegro, small country near italy. what do you think about this ram? https://www.multicom.me/racunari-i-oprema/memorija/kingston/memorija-kingston-kf432c16bba8-93684.html If i get 2 of them, can this work as dual channel?