david97

It does have one, but it's working fine, no weird noise.

That's exactly what I have done

Hi So I have a Samsung np-rv509-s01hu laptop, which is only able to boot sometimes. The problem is, that the winchester isn't start to spin up, so the windows logo is there, but nothing happens. Tried with ssd, fresh windows, but shows the same issue (btw installing a new system on this machine is a whole another story) After a restart, it may boot, but more likely to not. Then try again and again, and then the windows automatic repair stuff tries to start, but that can't neither. But after a couple of minutes of trying, it boots up, and working, like it should. Now I'm trying to install an update the windows, but I can't, because it's just refuse to boot all the time, and when it finally does, it shows the windows update error popup. Anybody has the solution for this? Thanks

But it works just fine with the other cpu, so the pins must be alright. And thank you for helping

@SamuraiXV1 good idea, i will try it

with the cpu, (which worked before the bios update) yes i did, set the bootdrive but with the other one it just sits at this screen and do nothing

My sisters pc just stopped working, and when i looked into it i recognized, that there was a condensator, which was twisted. This is an old system, bud they got it not that long time ago, so we had the previous pc. So i switched the motherboards, and when i fired up the system, it turned out, that the bios was too old, that it can't recognize the cpu(motherboard: gigabyte ga/945gcm-s2c, processor: intel core 2 q9300). Ok, no problem, than update the bios. (the following stuff isn't important, just the painful story of the bios update.-->> so i changed back the cpu, to the previous, to the working motherboard so they can at least use them pc. The bios update is only possible through floppy, so i had to get a floppy driver, than a floppy drive. when i had everything, i had to install another os, which is capable of reading floppy. so i just quickly downloaded a windows xp, which said it culdn't be installed, because "The installer didn't found the users licence code. The installion is impossible, to exit press F3". ok, than install some old ubuntu, than download the bios file and we are cool. But the installer of the ubuntu didn't showed up in the bios, so i grabbed the winchester, put it into my system, installed ubuntu to it, went back, and prayed for all of the gods to make it work. And it did worked, but i found no way, to connect to the internet, to download the files. So i went back to my pc, downloaded the files, put them onto a pendrive. On the linux system copied them onto the floppy and hit the restart)<<-- I could update the bios with no problem. Everything worked, the bios had been updated. When i changed back the cpus, and fired up the system, there was the following image. It doesn't see anything, only the processor, but nothing else. Not even a keyboard, to get into bios. Now i have no idea what the hack should i do. Checked the bios's "manual", it is compatible with the cpu. Checked the motherboards manual, it is compatible with the cpu. So if you have any idea how to fix this issue, i would very appreciate it.

ehhh that's sad. but anyway, thanks for your answer

so i just get a new monitor, which is slightly bigger, then my old one, but in resolution, they are the same. (22 inch 1080p and 24 inch 1080p) And in windows, there is the option, to balance the tow monitors, but its only care about the resolution, and not the physical size. So in the bottom of the screen, if i cross the mouse, they are in perfect line, but as i get higher, the gep is getting bigger between the monitors. So do anybody knows any programs to eliminate the problem? Thanks for your help!

Thanks everyone!

So i recently bought a Scythe Ninja 3, and it's not fit into my pc's case. Do anyone uses this cooler around here? Whit waht case? Do you know any cheep solution? Thanks for your answers!

I guess you are right

So I recently bought a sapphire rx 460 4gb, and it didn't seems to work. So I went back to the store, and it worked perfectly. In my build, it's working, but only turns in, when the windows is fully loaded. It isn't a problem in regular using, but for eg. to reinstall windows, I have to change the video card to another one, witch is working without a loaded windows. I using an intel core 2 q8300 processor (LGA755), in an asrock p45x3 delux motherboard. I very appriciate every kind of help!