240_17user
-
Posts
7 -
Joined
-
Last visited
240_17user's Achievements
-
I think for some reason pci-E and Periferals couldn't be in one circuit, or they are booting not simultaneously, I mean what if they have small delay that can't boot video card from different sources blue and black(as I mentioned before and I have attached photos) even from black pciE Periferal 6 (where 3"+", 3 "-") plus experementally added (2 "-") from PCIE blue slot, any GPU won't start, only when cords are connected to blue slots. P.S. 1GPU 8pins; 2GPU 8+6pins; boot only from blue sockets on PSU hx650; wires all checked vise versa.
-
Cables are fine, usual 6+2pin.
-
It doesn't work at mode 6+2pciE(blue)+ 6(black) and I can't understand why? (Even solo). It works perfect only when I use 2 both blue sockets to connect 8+6 card, then I can't connect second gpu anymore...
-
-
-
R9 280x have only 14pins Boots only when I put wires into 2x8 slots (I need 1 for another gpu) on psu, won't boot when I put wires into 8+6. Video card boots only on blue ports, why?
-
K. I have asus R9 280x and psu corsair hx 650. That boi has blue 2x8 pci-E and black 6x6 Periferals and Sata connections. My other GPU only needs 8pin pci-E, however, R9 280x boots only when it starts on all 2 blue 8 pci-E (16) but it should take only 6+8 (1x6pins from Periferals and Sata, and 1x8pins pci-E), where in last case system won't boot at all, only half sec coolers lights and done, no response until O/I PSU . I want to give 1x8pin for each of my gpus , and add 1x6pin for R9 280x and boot all of that somehow. I know that I could solder 8+6 just into 8pin and it should work but I never done this before, or probably my system won't boot because 6pins power really only for Periferals and Sata, or it start work not at the same moment with 8pins, don't know. Help pls to find best cheap and fast solution for this problem, thanks.
