yaseryaser

Got it, God bless your wonderful soul you were absolutely right and thank God you are a part of this Awesome community, I was trying for about 4 Hours!!! Finally, I feel idiotic LOL

Are you 100% sure, I tried every type of screws shown in the photo!

the Motherboard after seating it on the standoffs, I can't figure which is the right screws, there is something wrong and I started to think that there is a bag of screws missing!!! the only screws that "fit" well was the hexagon and they are only 4 of them!!!!!!!!!!!!!! \ should I use 2 types of different screws on the Motherboard, please HELP it's driving me crazy, the M3 screws keep rotating forever and like I mentioned the Hexagon fitted very well but they are 4, the standoffs are 8 so I must install and tighten 8 screws common sense.

I have an idea but not a full proof solution per say, "Disk Cloning" you could clone the HDD to the SSD and there are free software and free trials you could check out, personally, I had never tried it yet

Hey, guys, this is Austin LOL no just kidding well if you've seen this video I would like to see the whole build for that freaking awesome futuristic shenanigans, so is there a channel\s to watch the whole thing from start to end ?!? from what I understood that Computex builds was done by companies, not by individuals correct me if I am wrong\\ I watched a ton of regular PC builds and love to watch more elaborate builds \\ out of the ordinary builds \\\ any help is appreciated and sorry for the long post \ PEACE

now I am happy

watch this to get what I mean

but you must pay attention to the orientation they go in a column not rows like every connector in a queue

try to watch a couple of vids on youtube before attempting connecting them again, are you sure the manual didn't help there must be some sort of diagram for the motherboard and clear instructions for the front panels, I don't have the skill to describe exactly how to hook them

the thing I forget to mention is in my area there aren't a lot resources\PC stores so I am limited to what they offer and I don't want to order online so the least wattage option the seller had is 550W.

ok maybe I didn't explain enough the 550W will draw MAX 150W according to my build ALL the time it will be providing roughly 25% of it's potential and probably less SYSTEM EFFICIENCY concern quote "a power supply operates optimally ABOVE 15 to 25 percent of its total capacity that means that your system will actually draw more power from the wall than it has to and your power bill will cost a bit more" the video: from 1:27 TO 2:30

Noice

ok maybe I didn't explain enough the 550W will draw MAX 150W according to my build ALL the time it will be providing roughly 25% of it's potential and probably less SYSTEM EFFICIENCY concern quote "a power supply operates optimally ABOVE 15 to 25 percent of its total capacity that means that your system will actually draw more power from the wall than it has to and your power bill will cost a bit more" the video: from 1:27 TO 2:30

OK let say that all of my PC components consume or need at MAX load 150 Watts, and for some reason, I installed 550 Watts PSU (i know it's an overkill) but I need badly to know what is the worst case scenario here in terms of "longevity" and what risks I may face with this kind of wattage the custom build as follows: i3 7100 8GB DDR4 2400 MHz one stick ASUS B250f gaming SAMSUNG EVO 960 256GB M.2 NVMe NZXT H440 Case and last but not least 550 W PSU

AHA, so it will get the lanes from the motherboard, not the CPU. GREAT thank you:D

Hey awesome community, Soon I will custom build a PC with the following components: i3 7100 \\(it has MAX 16 lanes of course) ASUS B250f Strix ROG \\ (2 M.2 slots available) SAMSUNG 960 EVO 256 GB M.2 PCIe NVMe \\(which require 4 lanes) 8GB DDR4 2400 MHz Hyper X Fury 1050ti Nvidia GPU PSU 400W NZXT H440 Case so my question is: the GPU will occupy the full 16 lanes provided by the CPU so How will it manage to provide the 4 lanes required for the M.2??? or the GPU will downgrade to 8x!!! so 8x+4x=12x which will result in a loss of 4x lanes to the nothingness! please help me to understand because it's confusing sorry for the long explanation but I need to be clear exactly what I need. Thanks in advance and God bless you all

Ya, sorry your post is more correct&informative I will erase it you are absolutely right hey, can I send you a build question via message??? HKZEROFIVE

.

Imagine a "famous YouTuber" doing a live PC build and he accidentally farts! that will make my year I will fall off the ground laughing

Do you talk from experience?

so I can buy it separately and connect it to the motherboard.

NZXT H440 got a freaking PWM Fan Hub, I saw a review and started drooling

No code no puzzle, I was wondering if someone anyone while building a PC fart, Honestly you could classify this Post as a slight TROLL. no need to overthink it dude. Take care

Thank you, everyone, proud to be a part of this community your posts help a lot.