NubCak

The best chair you'll ever sit in. I work from home and i'm on my computer most of the time. No back pain or whatever. Simply the best that money that can buy.

lol...very rarely do other components heat up faster than the core. thats why you can use thermal epoxy and stick on shitty little heat sinks on the vrms and vram for non full coverage water blocks.

Jesus christ, maybe you should go read the british medical journal or something, cause clearly youtube is too much entertainment for you.

Herman miller.

i mean...if the die is the highest point, then the waterblock would still cool the die, your VRMs and mosfets and ram chips may suffer due to using a probably thicker thermal pad though.

So explain, why BilletLabs has not filed a lawsuit?

That's what I'm saying. If there was any ground for BilletLabs to make a claim, they would of already done so.

Play stupid games, win stupid prizes.

K great! They published a set of numbers. So billet labs should be suing LTT right now for some good money. Defamation? yum yum Or is it more than likely than their numbers are "subjective" and won't stand up in court?

It's interesting of you to assume that i have no idea how machined parts work or how tight of a tolerance you can work with. So why don't you tell me how tight of a fin array you can CNC? Or do you know what the smallest CNC router bit would be? I've been saying this whole time, you guys are trying to argue that this block MAY PERHAPS perform well. I'm saying based on it's design, it has several fatal flaws and would be HIGHLY UNLIKELY, in fact IMPROBABLE that it would perform well. As stated several times above, water blocks aren't magic, it's a heat transfer device. How does heat transfer work? it's a combination of surface area, material used and flow rate. NOW: Material used: Dead even The billet labs block is copper and so is basically every good water block. There would be no statistical advantage. Surface area: all other water blocks by far The billet labs block uses a CNC'ed cold plate and fin array, all other companies use skived fin arrays. As you clearly don't know, there is simply no way a CNC machine can generate the same density fin array as a skiving machine can. Flow rate: all other water blocks by far The jet plate on the billet labs piece is a means to direct flow into their fin design and has to fit within their physical design space limit. The jet plates of EKWB etc have been fluid tested etc. See? there is no way and no reason to even test the billet labs block, the billet labs block IS and always will be just an artisanal piece until they revise their design and use skived cold plates.

It doesn't even matter... GPUs are heat emitters. In fact when new GPUs and CPUs are released, Cooling component manufacturers aren't even given the actual CPU / GPU to test with, they simply use a heat block and pump 105w or 170w or 370w etc into it, and attach the cooler to test. The fatal flaw of this block is that the cold plate is CNC'ed and not Skivved. There are no CNC bits small enough to yield a high density fin array like a skivving machine can offer. Does that make sense to you? Hell you might actually want to watch the video on how water blocks are made on your lord and savior GN's channel.

I mean like i said, we kind of do know... it's not some black magic...the density of the cold plate was far inferior to mass produced blocks which have specialized skivving machines to create many many more fins....

You really like spinning things eh? From memory Linus basically said it was not worth retesting because the price and performance would still not yield a favorable review based on the design of the block.

And i have debunked said person's argument. Again there is no point in retesting it, I would not retest it either. What would be the point, to give you another comparison. What's the point of testing a 2024 honda civic against at 2024 Huracán?

I don't think that's the job they accepted. I believe BilletLabs wanted exposure and sent their artisanal block to LTT to be featured. If indeed it was sent for a "review" then BilletLabs should be filing papers to sue LMG.

Linus is my hero? Wow that's something even I didn't know. If the billetlabs is indeed better than a EKWB. (which btw isn't the best) Where is billetlab's data sheet? You would think if this is such a great performing block, they would have data sheets available right?

You can use your own time to rewatch and read from different sources. I'm not spending my time to enlighten you.

what do you mean? There is a huge amount of data preceding the specific task. You think waterblocks are some sort of magic? The amount of fins on the cold plate, combined with the materials and flow rate of fluid determines the heat transfer rate. Cooling systems are not some sort of magic, you can calculate the rate of dissipation. The fact of the matter is the cold plate in the billetlabs block is inferior to basically any mass produced waterblock made by ek, thermaltake etc,

Your argument is based on a simple premise, of the product actually being worthwhile whether in function or quality. Linus's argument was that a retest was not needed because functionally and pricewise it's a product that simply won't survive on the market. Which I believe he is correct. As an artisanal piece, it's ugly, singularity's stuff is way better looking. As a functional piece, its behind in performance. As for price, well, we all know the story.

Actually water blocks aren't some black magic. The cold plate is less dense than EK's or other competent makers of water blocks. There is 0 chance that it can draw more heat away than the above. So again, i ask you, what is the point of retesting a block that is inherently flawed from the start? Or let me phrase it this way, do you need someone to jump off a roof of the empire state building to know that they would die? Even if it were retested, it would not be something that they would recommend, as it would perform worse and cost a lot more, so what would be the point?

I suggest you rewatch the video and look up the facts again, theres been quite a few new facts that have surfaced.

No spinning needed. Billetlabs block performs worse than a off the shelf block from EKWB for less than 1/4 the price. Why waste time and money to retest something that is known to be worse?

lol. Don't you find it wierd for someone to not view a job offer and contract before deciding to uproot and move? Basically you would of signed a contract way before you even booked plane tickets to your new home.

Sounds more like you are inexperienced and have yet to enter the real world. I am self-employed and already am enjoying the finer things in life. lmao, you think uprooting your entire life going to a new job in a new location and hoping everything works out ok is a good and viable idea? wow, you are naive, incredibly dense, entitled or all of the above. Does it matter when it was announced? Or what? She's gonna look bad on the internet for all of 2 minutes? Again. Young and naive, never planned that it could not go well.

Then you've made a bad decision in life, to uproot your entire life hoping that everything works out.