DekaRanger

Hello. As the title states, I am in need of some help. Just build my first system and it won't boot. The q code that comes up is AD. The motherboard I am using is a Asus Rog Zenith Extreme with some 4x8gb Corsair vengeance rgb 3466mhz cl16. I haven't installed the bios or anything since the screen doesn't turn on or anything. The fans on the cooler and the gpu start and acts like normal it seems like. If I missed any important information just ask and thank you for your help!

Thank you for that information. I didn't know it was a dust magnet. It only has a filter on the front mesh panel and not on the slits unfortunately. I can also sneak some cables through the hard drive slots since I most likely won't need them in the future. I bought the Corsair psu cable kit since I wanted som nice cables but couldn't get cable mod unless I wanted to pay over double the price of it since taxes and stuff like that. Thank you for your help!

I don't mind it being more difficult as long as it is possible and can be functional. At second thoughts, it is a bit to much glass/acrylic for my use case since I will be in a sort of "gaming house" and I don't want to constantly wash it off since they can't keep their fingers or something like that off it. I know you didn't bring up this case but how about the Enthoo evolv Atx or the Enthoo pro m? As i stated in the beginning, I saw some pictures of the case with a I believe a 272mm motherboard(can't find accurate numbers). https://pcpartpicker.com/b/R2HNnQ The Zenith Extreme is only a few mm longer, is it possible you believe?

I wish I could to be honest but unfortunately it is the only one available for the coming weeks since Threadripper is so new. The pc needs to be built asap, that's why I went with it.

It says on Phantek's site that it can fit up to 272mm but then I can't use the rubber grommets. I know I said I have no problem covering them but, how will I now pull the cables from?

I have the Thermaltake Core G21 on the way but I realized a bit to late that it unfortunately doesn't fit the motherboard. Am I wrong about that or? If it doesn't fit I can send it back since they are very kind about that here.

In my opinion it looks hideous but everyone can agree to disagree. Thanks for the recommendation though!

Hello. I am looking for a case that supports an E-atx motheboard, 360 front mounted AIO and preferably Tempered glass side panel. I have no budget for the case but don't want to spend like 300-400$. The motherboard I will be using is the Asus Zenith Extreme which is 277mm/10.9inches in width. I was looking at the Enthoo Pro M and I know, it only supports E-ATX up to 264mm but I have seen some pictures with a 272mm motheboard and it fit but covered rubber grommets which doesn't bother me at all as long as I can get cables through. If i missed anything important just ask. Thank you in advance for your help.

I don't want to do alot with the case. I just want to keep it in its original state. Do you think it is the same for the enthoo pro m or any other mid tower cases? I'm just asking theoretically.

I was looking at the S340 but decided not to go for it since it didn't have 360mm aio support. I forgot to add it but i edited it now.

Hello. As the title states, I am in need of help deciding on a case. I was planning on getting the Thermaltake Core G21 but unfortunately it can't fit the Asus Zenith Extreme which is 277mm(10.9 inches) wide. Are there any cases that can fit it and aren't overly expensive. I was looking at the Phanteks Enthoo Pro M TG but it can only fit up to 264mm wide. The case must also fit 360 aio. Any ideas on a case and thank you in advance for you suggestions!

That's what I was thinking. Everyone said it was gonna fit but it will be close. I am so confused right now.

Hello. I was planning on building in the Thermaltake Core G21 TG and then today, they released Fractal Design Meshify. I was planning on using a gtx 1080 Ti Strix and an Celsius s36 in the front. The Gtx 1080 Ti is 29.8 cm(298mm) long and the Meshify can hold up to a 315mm gpu with front fans. Can I fit an S36 with fans in the front? Sorry if I was a bit unclear on anything! Thank you in advance.

Damn. I thought with the right-angled 24-pin connector it would work. With that knowledge I have to get the Crosshair VI Hero. I'm not complaining but I wish it would fit. I will be transferring the case here and there which is why I didn't go with the 570x. Too much glas all around. The Core G21 has just enough for me plus, the mesh front panel is beautiful imo. I saw GN's video on the case and I will remove the dust filter.

I am planning on using the Thermaltake Core G21 but, it is not on PCPP so I couldn't add it to the list. If I need more ram I can just purchase another kit if needed.