-
Posts
5,163 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Posts posted by Billy_Mays
-
-
2 minutes ago, thelordofwarr said:
For me Speedfan doesn't even provide a Vcore2 value...it doesn't have it at all
What version do you have?
-
3 minutes ago, violentnumeric said:
I haven't used speedfan in forever, it's just outdated IMO. So I'd agree it's the one most likely to be completely wrong.
I just use it to change my fan speeds tbh
-
2 minutes ago, thelordofwarr said:
Ok, what cooler are you running? but that shouldn't have an impact on voltage, I still think Speedfan is just showing you sth that's not true, but for the sake of it I'm going to test that with my system...exspecially for you
Pccooler s88, it’s a cheap one from China
-
7 minutes ago, violentnumeric said:
You could definitely try applying a better thermal paste. Stock stuff that's pre-stuck on heatsinks is almost never proper. It'll get air bubbles or just not spread fully, and is meant to be stable without drying out when it's left out in the air on a shelf for 5 years.
The cooler I have isn’t the stock cooler, when I bought the cpu and motherboard used it didn’t come with a cooler, and apparently this combo was used in extreme ocing
5 minutes ago, thelordofwarr said:LIQUID METAL EVERYTHING no don't do that...stick with ic diamond...just stay away from it...it's a pain to apply...but when the addiction kicks in
I haven’t touched Tim that’s better than cp15
6 minutes ago, thelordofwarr said:that doesn't impact just run a stresstest
Is prime95 fine?
-
6 minutes ago, thelordofwarr said:
Other sources say it's the chipset voltage...what a mess. Could you do me a favour and open cpuZ and HWmonitor and set the CPU under load? just for like 2-5 minutes AIDA64 extreme. maybe with those values we can figure out some more
I also only have the trail version of aida64
-
3 minutes ago, thelordofwarr said:
Other sources say it's the chipset voltage...what a mess. Could you do me a favour and open cpuZ and HWmonitor and set the CPU under load? just for like 2-5 minutes AIDA64 extreme. maybe with those values we can figure out some more
The bios says it’s 1.236vcore
-
18 minutes ago, violentnumeric said:
Can you try HWiNFO64 and see what that says? You might see 3-5 different vcore voltages so look at all of them.
If you're getting very high temperatures I'd lean towards the highest reported voltage being accurate.
It’s 1.120, the cooler I have is from China with crap paste, could that also be it too?
15 minutes ago, thelordofwarr said:As far as i researched, speedfans Vcore2 is actually you ram voltage, maybe check you bios what is set to what
I’ll check my bios
-
Just now, thelordofwarr said:
Also what other vcore values do you get, can you maybe provide screenshots?
I just posted some when you replied the first time
-
-
I’m getting two different numbers from two different stat things, it’s hwmonitor and speedfan 4.52, on HWMonitor I’m getting 1.216 and on Speedfan I’m getting Vcore2: 1.52. Would this be a problem why my i7 is over heating on a cooler that’s very comparable to the stock cooler, my specs are i7 920, Gigabyte GA-EX58-UD5, EVGA 450BV.
-
1 hour ago, ghost001985 said:
not all. it doesnt work with a gt 710 8x card. but im wondering the difference between the cards.
Should’ve said most
-
I can confirm Resolve works on all GPUs, I used it with my laptop, my old GTX 770, and my RX 560 and Radeon HDD 5450
-
35 minutes ago, bimmerman said:
I don't know about the EX58-UD5. The X58a-UD5 and -UD3R work very well with the Xeons.
If the motherboard says it's compatible with the 32nm chips, that means it'll work with the 6 core Xeons (update your bios first).
Try it and see?
Its version F12 and I dont have the xeon it'll be a month or two before I get it into my hands
-
Just now, panther420 said:
Did you read my post on your thread?
The board doesn't play well with Xeons (well, at least mine didn't). X5660's are cheap enough though that it wouldn't hurt just to try it.
Yes I did, thats how I got here, but I dont want to have wasted money, but there is a guy local to me with an LGA 1366 board too, I'll get the model
-
Im trying to get a X5660 on my Gigabyte GA-EX56-UD5, but idk if it'll work, so would it work, I dont have ddr3 ECC just normal ddr3
-
2 minutes ago, Pasi123 said:
Yes. It should work
You've tried it?
-
Just now, Prqnk3d said:
its not on the list of supported cpus. https://www.gigabyte.com/Ajax/SupportFunction/GetCpuList/?Value=2958&Type=Product
I checked that, I did research before posting
-
Im trying to find out if this Xeon works on my motherboard, because Im wanting to get better performance out of my rig and see if I could stream in a couple of months, so is the X5660 able to work with my motherboard?
Edit: I have done some research, some say it can work well some say it doesnt work
-
On 1/20/2018 at 3:58 PM, Damascus said:
In that case it should mount. It's worth a shot, make sure you have connection between the GPU VRAM and the block.
I could give it a go, if I can get enough from my htpc Im building and selling, also with my i7 920 and mobo
-
7 minutes ago, Damascus said:
In that case it should mount. It's worth a shot, make sure you have connection between the GPU VRAM and the block.
Yes I will, it most likely should work anyways
7 minutes ago, TheRandomness said:Repaste it and see if that affects load temps at all.
I'm in a PUBG game right now
-
3 minutes ago, Damascus said:
It's the mounting holes I was asking about. The 4 holes around the core.
It is 54mm between the holes, in the middle of each hole
-
1 hour ago, TheRandomness said:
Set a custom fan curve to lower fan speeds, and/or replace thermal paste. No one's asked, but what RX 560 do you have?
-
3 minutes ago, TheRandomness said:
Idle temps don't matter. What are load temps?
75c on PUBG, very low with 100% fan speeds
-
Vcore two high?
in CPUs, Motherboards, and Memory
Posted
Yep, I cleared cmos couple days ago