Girishchan

Thanks for taking time to reply me.Here's what i am getting in the powershell command prompt.What to do now?

I've tried to install Ryzen balanced power plan from amd ryzen community update #3 here's the link to that forum https://community.amd.com/community/gaming/blog/2017/04/06/amd-ryzen-community-update-3 but it failed showing the error: provisioning failure,error code: 0x800700b7.Anyone's facing the same issue? my os- windows 10 pro 64 bit. cpu-Amd Ryzen 1700x

Update: I have flashed my bios from F5 to F6 on gigabyte board.Now i see huge difference in cpu temps in AIDA64.My idle temps are now 25-40 degrees celsius depending on windows power plan and also my ambient temperature is around 30-35 degrees at my place.So in winter i notice even lower idle temps.Ryzen master utility would report correct temperatures for cpu after updating to version 1.0.1.The version is yet to release on 11th april.

Update: I have flashed my bios from F5 to F6 on gigabyte ab350 gaming 3 board.Now i see huge difference in cpu temps in AIDA64.My idle temps are now 25-40 degrees celsius depending on windows power plan and also my ambient temperature is around 30-35 degrees at my place.So in winter i would notice even lower idle temps.Ryzen master utility would report correct temperatures for cpu after updating to version 1.0.1.The version is yet to release on 11th april.

I'm facing the same issue with my 1700x.I'm equally worried.

My cpu shows high temps in ryzen master utility but when i touch the radiator it doesn't feel hot.I have plugged the cpu headers correctly i.e cpu pump fan header into cpu_opt and radiator fan header into cpu_fan and have set the pump fan to full speed.Even i have replaced old thermal paste which has 2 W/m-K thermal conductivity to new high end one i.e Cooler master gel maker nano 11 W/m-K.I live in a tropical country and summers are too hot here the weather temperature today is 38 degrees celsius in my city so expect the ambient temp to be around 25-30 degrees.I have 4 intake case fans in cabinet and 1 exhaust aio radiator fan spinning at 2100 rpm most of the time.Despite of all this i am getting high idle temps which is around 60-70 degrees in ryzen master utility.Someone please tell me my cpu is normal

I am using the recently launched masterliquid lite 120 water cooler which is the mini version of older masterliquid series.Isn't an entry level water cooler like it can't achieve cooler idle temps even?

I'm getting 35-50 degrees idle temps after subtracting 20 degrees offset from ryzen master's reported temperatures.

My motherboard - gigabyte ab350 gaming 3 rev 1.0 Bios- F5 Cpu cooler - cooler masterliquid lite 120 Power supply- corsair vs 550 Ram-gskill ripjaws 5 2400mhz 16gb kit. I am getting 70-80°C itself in bios mode and 40-50°C idle temps in windows 10 under high performance power plan with xfr(auto overclocking) enabled.The cpu core voltages remain 1.2-1.43V continuously.When I changed power plan to 'balanced' idle temps are 35-50°C and core voltages are 0.8225-1.43V.My room temperatures are around 25-30 degrees. Am i the only one who'z getting such high temps or is there anyone like me too.During Prime95 torture test the cpu goes to 70-80°C within just few seconds.All the temperatures stated above by me are noted after subtracting the 20 degrees offset as declared by amd community.I Q-flashed my bios but still no change in temps.During load temps cross 70°C easily.I have applied cooler master mastergel thermal compound in right quantity yet facing the issue.Even the cpu cooler's fans also spin at maximum speeds even at idle temps.Should I RMA my chip ?someone please help me out.