MuRado
-
Posts
18 -
Joined
-
Last visited
MuRado's Achievements
-
Using two PC and 1 pair keyboard+mouse with 1 monitor?
MuRado replied to JimmyConrad's topic in Peripherals
Logitech MX mouses can handle 3 devices over bluetooth and im sure they have some keyboards where you can connect up to 3 devices aswell. It's over bluetooth tho -
A GTX 1050 should do the job, I'm dutch too and I would advise you to have a look here
-
You can use the Corsair Commander Pro to connect the fans and control the RGB elements by software. Corsair's fans doesn't support Aura AFAIK
-
I went for the EVGA one after all comments. The choice was made due the price and the performance overall. It should run pretty cool in my case and I will run games on 1080p which should be totally fine for this card. Thanks everyone
-
Great, this helps me a lot. I was also worried about the Gigabyte one because it has a 8 + 6 pin and my psu only has a single 8 pin connector. I will go for the EVGA one, even while it has no backplate. No Asus here sorry :D. Asus are all out of stock sadly
-
The EVGA one is 25€ cheaper over the Gigabyte one.
-
Hello, Im planning on getting a GTX 1070 for a while now but since the online coins is getting so populair it's hard to find a gpu now. Currently I am able to pick up two cards without waiting ages for it to arrive. It's the EVGA GeForce GTX 1070 SC GAMING ACX 3.0 Black Edition or the Gigabyte GeForce GTX 1070 Xtreme Gaming. I have a hard time on deciding which one to pick up since my current system is not that great. I am planning to upgrade to RyZen soon. The problem I am having right now is that the EVGA one does not have a back plate which is always nice to have, but the Gigabyte one has quite a high power usage. My current system has the corsair CX430 psu so im not sure if I am able to run the Gigabyte one.
-
Here is a picture of what I've tried. *See Picture* On the picture I have the 2 front fans plugged into each other using 4pin large molex, this connected to the fan on the back which using another large molex, this leading back to the CHA_FAN_2 on my mobo using 3pin *Edit: im not totally sure if im editting the correct setting on the mobo. It only allows me to change Fan 2 inside the mobo so I only change the 'level' by lowering it back from like 7/8 to 4
-
Right, so I tried indeed changing the settings in UEFI of my case fans but it did nothing. I played a bit with the levels I could change but no result. So the short answer is I can't lower the RPM of my case fans?
-
I have a ASRock 970 pro3 R2, I got myself a new case which is the Sharkoon VG5-V. It has just default included 3 case fans, nothing special. I placed the 3 pin on my cas_fan_2 first like I mentioned earlier, then I tried PWR fan 1
-
Thank you, The PWM connector is a 3 pin, the other 2 I connected to the first one are those big 2 pin Molex @airdeano
-
Hello, I got myself a new case today which included 3 fans by itself. I'm not really sure what to use but I read that I could control the fan speed when I use the PWM connectors. So I hooked 1 fan using the PWM connector and the other 2 fans connected to the first one using Molex (MolexCeption?). I placed the PWM on my mobo on case fan 2 and when I go into the bios it shows up, but when I lower the speed level it doesn't work. After I tried to put it on case fan 1 on the mobo but same result. I was looking for a Zalman Fan Mate 2 but im not sure if I can plug 3 case fan's on that splitter Anyone knows something else I can try?
-
Great, I'll post an update tommorow
-
All my drivers are up-to-date. My pc is also clean since I take care of dust like once a month. Temps are also good, gpu on load doesn't hit 70c and cpu on load does not even hit 60c I got my rig for about 3 years now
-
Thanks for the reply, but unfortunately no I did not change settings in the bios. But I'll give it a shot I can reset my bios anyways and wait for the outcome
