pcbuilder9595

bump

any more thoughts/opinions?

Also, no matter what monitor I go to, I would like to at least stick to having IPS, a PPI of at least 100 and G-Sync. Im also not too crazy on giving up the refresh rates of 100+ which is a massive leap from the standard 60.

my bad for posting twice.

This is not Back-light bleed? example with lights turned on in the room: Example in the dark:

Last week I have purchased a PG279Q Asus monitor. It arrived with a higher amount of back-light bleed then what I was ready to accept. I have taken the monitor back to the store I purchased it of, and this morning they have received confirmation from the supplier that the monitor is valid for a swap. As the supplier does not have another PG279Q in stock, it might take some additional time for them to get me a new one, therefore the store offered me to take a different model instead. I have the following 2 main concerns: 1. If I swap for a new PG279Q i might get again another one with same or worse back-light bleeding issues. 2. I am having a very hard time finding any alternative candidates with the specifications that this monitor has. It has amazing colours as well as great gaming related specs. pc specs: https://pcpartpicker.com/list/GcnRM8 Any thoughts?

I 100% agree. And that is definitely step 2 of my plan. The price of any component in my country, is quite different then the ones you have stated in your proposed build. I would still be paying approximately 50% more, due to EU tax regulations. The budget that I have is what it is for the time being. As a start, I chose to go with a monitor that will be able to perform well in both aspects, both fun and work. Then later in the year, im definitely planing to upgrade to a dual monitor setup. The one you have mentioned is a strong candidate to fit the build.

My work mostly involves structural and procedural documentation. So no Fluids or aerodynamics applications. However, I do plan on adding another monitor for increased productivity. One thing I've kept at the back of my head for most of my research was future-proofing. Software can easily adapt and add support for more then 4 cores.

Thank you so much for your through input. Ill make sure to use PPP in the future for component build presentation to the forum. As far as the PSU goes, the system would need somewhere between 450 to 550W of power. for the HX1000i that that puts it right around the 50% load mark. would that not be ideal? the AX860i would be somewhere between 55% to 65% load. Personally, I would be super stressed dealing with used components. I would rather pay the extra for peace in mind... Ill take a look at some cheaper options for ram, tnx for that one As far as the M.2 goes, yeah, I have a fair amount of work with Adobe premiere. Many project require some virtual reality walk through, so I do animations within the 3D modeling software, as it has integrated plugins, and export and do final edits in Adobe Premiere. The currently released 960 EVO seems to be a solid peace of tech, however the price jump does not seem to be so different to the 960 PRO, just sadly it's not available to me at the moment. I can always upgrade later. Good point for the fans. I could potentially then use one for the front and one in the back. the two extra I could swap the stock Corsair H115i fans for the radiator with the Noctuas. Ill bring up the case size tomorrow when I head down to my IT dealership to to discuss further expansions and air flow issues. Once again, thanks a lot. Truly appreciate it

Unfortunately I need a stronger computer by the end of this week, as I have some pretty serious projects coming my way. I was considering your option to be honest, but that's not possible unfortunately.

Hey guys, I am an engineer that works with 3D modeling software and at times require some rendering and video editing for some projects. In the free time I enjoy playing games. I have always been a tech fanatic, and I always had to have the newest and best that was out there. Today, compared to 4-5 years ago, that ceiling seems to have risen noticeably, and the cost for the absolute newest and top components significantly out of my budget. For the 4-5 years, I have been using my Asus G75VX notebook for work and play entirely, however this year, I have decided it was time to upgrade, and to a desktop. The build: PSU: Corsair HX1000i or Corsair AX 860i Monitor: Asus ROG PG279Q CPU Cooler: Corsair H115i Case: Fractal design define S MB: Asus x99 Strix CPU: Intel I7-6850k GPU: Asus Nvidia GeForce GTX 1080 A8G RAM: Corsair Vengeance LPX 32 GB (4x8GB) DDR4 2400 MHz Storage: Seagate Barracuda 3.5 inch 2TB 7200 RPM Storage: Samsung SSD 1TB 850 Evo Sata Fans: Noctua NF-A14 --- x 4 Keyboard: Razer blackwidow ultimate stealth 2016 Mouse: Razer taipan OS: Windows 10 I would like to explain my thought process on each of the components and why I would need them for my work and play. Any feedback would be much appreciated. Any potential compatibility issues, unnecessary components or bad experience with any, please do let me know, it would help me greatly! PSU: I chose Platinum+ standard to ensure maximum efficiency and longevity of the computer. A lot of expensive parts that I would hate to go to waste due to this. However, Im still not sure about the total wattage required. I do intend to upgrade to another 1080 A8G in SLI eventually down the road in 2-3 years time. I also, plan to add 1-2 more HDD and the new Samsung 960 PRO M.2 PCIe when it is released for EU marketplace. Would the AX860i be enough? Monitor: I chose this monitor, because it has both IPS and a high refresh rate for gaming and work needs. Only worry I have here is the back light bleed. I've been informed that it's due to the size of the screen. Most of the 25 inch monitors do not suffer from this. My other option would be to settler for 25 inch monitor in the similar category of specs. Should I be concerned about the back light bleed, or just go for it? CPU cooler: I simply cant justify the price of the 6850k unless going for the best AIO cooling option here. The never ending debate of wind vs water cooling brings the AIO water cooler ahead with my fear of the RAM and other components potentially not fitting on the board with a noctua 15 CPU cooler. Also, additional heat dispersion within the case. The AIO water cooling solution seems to be elegant and effective at the same time. Case: Simple design, but sturdy. The Cooler master master case maker 5 was my primary candidate since the beginning, but the internal fan controller and LED strips which I simply have no need of dissuaded me from perusing it. the Cooler master is by far a lot more pleasing to the eye then the define S, but I cant justify paying 2x the price for multiple added items and I/O's that I have no need for. MB: Out of all the X99 MB's that I've gone over, this one seems to have the best price to performance ratio. Not sure what more to say here. If you guys thing there are better candidates in the same price range, do please let me know. For future SLI and M.2 upgrades. CPU: first I considered the i7 7700k. Constant over-heating issues and build quality concerns. Second, and longest candidate, the i7 6700k, mainstream CPU, great ratio of price to performance. Finally I've come across some additional funds and decided to go for the i7 6850k. I've deiced to upgrade the CPU and the MB mostly with the added investments as I think that 6+ core utility in my line of work, is extremely useful, and support for games, will eventually come through. The 6850k with it's faster threads compared to the 6800k will perform better on the gaming end as well. If I was to stick with the i7 6700k, in what would you advice me to invest the excess 400 USD? GPU: I chose one of more mainstream GTX 1080's considering if I do decide to go SLI, I want to be able to find one in 2-3 years time on the market. RAM: I dont really have any intention of OC'ing any of my components, as such, I cannot justify paying more for the Dominator platinum line. The i7 6850k supports up to 2400 MHz, as such, this pack of 4x8GB pack feels perfect for the task on hand. I still have 4 slots on the x99 strix to add more if need be in the future. Storage: For now I am getting the massively sold Seagate 2TB. I will probably be adding a couple more as the memory fills up, and I will be in need of more. I do have multiple large external memory's on hand (as I do work with limited space on my Asus G75VX laptop). Storage: I am well aware that new line of Samsung SSD's will hit the market in eminent future, however this option seems to be ideal. The 1TB is the perfect volume for that I use it for. A lot of programs and some games that take up several hundred gigabytes of space. It has a good warranty. I am waiting for the Samsung 960 PRO M.2 PCIe to be released, to make that my bootable drive when it is released in the EU marketplace. Fans: I chose the Noctuas as Linuses #1 advice for case fans. They are strong and get the job done quietly. Ill have 3 in the front, one at the back, with the H115i at the top. Keyboard: I already own the Razer taipan (im left handed) and this keyboard just seems to fit perfectly with my other peripherals. I would greatly appreciate any and all feedback on my build. This is the first time im transitioning from a laptop setup to desktop and this is certainly one of my biggest investments to date so I would like to be as sure as possible with my decision.