mscaff

Hi All, I have a Z270-AR with an EVGA 1080Ti FTW, running in Win 10 Pro (Anniversary) My BIOS and Windows install for some reason takes place on the second display, however once drivers are installed correctly, everything displays as normal. To clarify, in Nvidia Control Panel, my primary monitor is correctly identified as "1" and my secondary, as Display "2". Using the Ctrl + P shortcut, it correctly displays/disables the monitor in question, so setting to Primary Only or PC Only works perfectly as it should. For reference - I have both monitors plugged into DP, on the two ports next to eachother - though not in the order I would have expected, however NVIDIA CP reports as 1 and 2 as expected. I believe there's a setting I can fiddle with in the BIOS that should fix this, MSI for e.g has WHQL Win 8.1/10 support, does this exist on ASUS? Any ideas guys? Let me know if you need any further info. Matt

Hi all, Not new to PC issues, so normally be able to resolve these sorts of issues myself, however run out of ideas. New build - the system is having issues POSTing. New chipset, could just be having release day issues... - Win 10 PRO 64 - Asus Z270-AR - Corsair Vengeance White LED 16GB 2x8GB 3200MHz C16 (XMP) - Intel i7 7700K - Samsung 850 Evo 250GB - Seasonic Prime 850 - EVGA GTX 1080 FTW ------------------- - System intermittently fails to boot from cold boot. - System fails to reboot effectively - sometimes taking 10-15 seconds to see Asus splash. - Does not display BIOS menu when POST fails. - Not a display issue as OS is not laoding (drivers not loading for Xonar STX) - Issue may be related to XMP OC for RAM. - Tested with all-core enhancement ON and OFF. ------------------------------------- Troubleshooting: - Reseated RAM - are in A2 - B2. - Loaded failsafe defaults. - Reset CMOS - Attempted to update BIOS, will need to re-attempt, no BIOS info on site just yet. Feel free to share any ideas - will be running memtest86 tonight. Thanks! Matt