Knawlege

Thank you so much!

I have an IT test tomorrow and I would really appreciate you anyone can help. I uploaded an image of a Storage Capacity quiz my teacher designed for my class and I can not figure out how to do the actual size part of the quiz Key= Yellow=Correct Red=Incorrect

There are no display drivers https://www.msi.com/Laptop/support/GP62-2QE-Leopard-Pro.html#down-driver

So, recently i bought the Msi 2qe Leopard Pro laptop which is advertised as a 1080p display. However in windows settings the highest resolution listed is 1366x768

So I changed my mobo to the Gigabyte GA-B85M-D2V and the resolution was set to 800x600 i tried to change it by accessing system settings and it would not launch. plz help

Well I decided to replace the psu because when i shut it down then later when l tired to turn it back on it would not. l did the paperclip test on the psu that l replaced and the fan spun up. Do you still think that cpu, gpu and ram are still dead?

my hard drives work. if my whole system was fried wouldn't they be dead aswell

is there anyway i can find out?

do you mean just the motherboard or is the whole system dead

I have done the paper clip test with the hard nothing

Just recently bought a new power supply the 650w corsair modular because my old one died when i installed it would not boot. l tired the paperclip test and it was not the power supply nor was it anything else. it as the motherboard 24 pin connector is there any chance of fix?

can any of my parts be damaged if i dont?

So just recently my power supply that l had for a year and a half ran fine until l shut it down for later use. When i tried to turn it back on it nothing happen (i knew all the wires where installed correctly) l left the power button at the back off than came back in an hour and turned the switch back on and my pc ran fine. Is this powersupply still safe to use PSU: Widetech 650w

its an i7 4790 and G.skill ddr4 ram

Hey so my motherboard and 1/2 of my 8 ram sticks died not to long ago and i was thinking of getting it replaced. My cpu socket is 1150 and would it be possible to get an atx size?