tomersap

Thanks you verry much for the help!! I'll run more tests tomorrow (it's 03:20 in the morning in my country).

Hey guys I just finished to do all the work, I'm running the pc and the cpu temp seems to be fine now I get now mid 50 to 60 in ADIA64 stress test on 4.4ghz@1.304V. I think that the channels was in the wrong direction like you saied and I had this stuck in them. Btw this how the thermal paste was after I took out the block.

Yea I will open the block to double check that I assembled it good.

OK, thanks a lot (at least I will get to check if i did good the drain port), I will update.

OK. I will do that. How much thermal paste you suggest that I will put because I think I put too much last time (I did the star method).

I checked now and the temp are the same You say I should drain the loop and remount the block?

It's doesn't make sense that my temp right now are ok because with my air cooler i never passed the 75c (and the fan was bad) so on water to get more and even to 90 means that something is wrong.

How many days you suggest that I will wait? (2 days passed and more day and a half for leaking test - in total 4 days).

The pump is running fine, I have one bubble in one of the tubes and I see that it moves in the tube when I'm changing the pump speed (also I can hear the pump accelerating), as I said my gpu temp are great and the only problem is the cpu temp.

yea it's brand new loop, believe me I tried to move it and shake it

I didn't touch the voltage, it's on auto, if I will lower them to 1.24V you think it will be better? And I really don't want to drain the loop to remount it (but if there no other choice soI will) T_T

Yes i have, here: (this one is ok?) Btw, I put enough thermal paste (maybe little to much), I used the thermal paste that they gave me.

Hi everyone, I just finished my custom loop and started some test, my OC 970 have great temp (44c at max, on GTA V it not pass the 33c) but my 4790k have bad temp, I added some pictures. As you can see in the pic with the lower temp I have almost 10c deference between the cores (I got those temp when i was playing in GTA V) In the pic with the higher temp,I got those temp when I did AIDA64 stress test. I also added a pic of the CPU block, I see in there a bubble (above the left tube), no matter what I did that bubble didn't move an mm!! I'm not sure but maybe there are more bubble. Oh, I have to mention that the pump is on 100% when I got those temp. I got in my loop 2 360mm (38mm thick) rad and D5 pump (fans are thermaltake riing 12 - the one with the manual controller).

I thalked with EK about that and they saied that I have to use the ratio of 1:9 if I want that my system will be healthy. thanks everyone for your help

Yea I know but I dont have it, the shipping to my country take around one month from EK and I want to run the loop now hehe. I need around one liter (I have in my loop 2 360 rad - 30mm thick, one EK-RES X3 250, one gpu block, cpu block and petg tubes), I just thought to fill up the whole bottle with the coolants