Ivan Salas
-
Posts
39 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by Ivan Salas
-
No signal in BIOS with nvidia gpu. but i can access with iGpu
Ivan Salas replied to Ivan Salas's topic in Troubleshooting
damn, it was this, why would my BIOS change that? i didn't touch anything -
So basically the title, 1 month ago with nothing changed in my PC, no bios, no hardware upgrade, maybe windows updated idk, i tried reinstalling drivers (i don't think it should matter right?), it doesn't work And i don't want to try disabling the iGpu in bios because i will need to clear cmos if i can't access anymore I'm using the display port of my gtx 1080 ti, tried the HDMI, doesn't work, i can only get signal in bios with the hdmi connected to the motherboard I have no other problem related to my graphics card I don't think it matters but this is my monitor: ASUS ROG Swift PG279Q cpu: i7 7700k motherboard: asus z270e strix (bios updated)
-
the 2070 super will probably be fine but wait if you can
-
It depends of the game and settings, I would say "no" most of the time, above 60 sure, probably I play at 1440p with a 1080ti
-
Deleted
-
yeah, i get a better video using OBS, but still doesn't look the same, i just tested something and discovered that nvidia share is recording in "limited range" instead of full, and apparently there is nothing i can do, because the 2 settings in nvidia panel are set in Full already... i mostly want to use nvidia cause it has the instant replay, is more useful than recording 2 hours of gameplay
-
i tried, when i said 16 to 0 i meant the 0-255 or 16-255, is not OBS, is not geforce, there is some data lossing, any software that tries to record a video fails
-
I'm using OBS and Nvidia GeforceExp. The problem is that every time i record my games the colors are washed out, i can play without problem, but the video that i get is the problem, i can take screenshots with Geforce or steam or windows, with good colors, but i can't record videos... I tried every config in OBS or Geforce, i tried changing the range 16 to 0, i didn't have this problem when i was recording in my 1080p 60hz monitor with hdmi, now im using an asus pg279q (2k 165hz g sync ips) with display port OR hdmi at 60 hz or 165hz, same result, i don't get the colors, even if i lower the resolution to 1080p, i'm not testing my old monitor again because i'm sure is going to work just fine, i reinstalled windows 10 last week, this problem i have since i changed the monitor 1 month ago. attached an example
-
yeah i think 150hz is enough for me, i preffer to keep my colors
-
I got the monitor today, i have a little of back bleeding as expected, is not crazy like some cases, but i'm wondering if there is a way to make it disappear a little more, i readed that some people loosen up some screws and that helped but i can already see that this monitor only has 1, and btw im using it at 150hz instead of 144, i'm not sure if i should use 165, i don't know how much that would affect the life span of the monitor, i'm playing safe edited: i can only notice the back bleeding when is booting the computer or i open full screen black in paint
-
my motherboard is an asus ROG STRIX Z270E and i have it since last year, i recently change of PSU, upgrading from 600w to 750w, since i change my PSU my PC does not boot the first time (it turns off by itself), but if i try again it does, i noticed that after the ROG logo loads the PC shuts down, the second time works fine, full load for hours, i can keep the PC power for days, no problem there, but if i shut it down the PC shuts down after the ROG logo loads, if i reboot there is no problem, only when is turn off, i got a PSU from a friend 650w, brand new, he told me to use it for test if the problem really was my PSU, same problem, the same thing happens. i tried using both PSU in different combinations, nothing works, so i concluded that the problem has to be the motherboard, i hope someone could help me find out how this happen and if i can fix it, i already updated the BIOS 2 times, didnt help more info: 2 SSD 1 hard drive 1 M.2 GTX 1080 EVGA FTW2 i7 7700 (non k) 16GB RAM DDR4 PSU1: corsair tx750m PSU2: evga 650
-
for what i have seen, it should just boot if i unplug the other drive
-
i clonned my drive with Macrium Reflect, now what? i cant boot it yet
-
rebooted, now it works
-
nothing at all
-
i downloaded that ReflectDLHF.exe doesnt start
-
yeah, i did something similar last time, but now i have a lot more stuff installed and in theory the samsung software should work just fine but is giving me an error
-
and the C: drive has 55GB of free space
-
they are all with SATA, the only thing that i touched in the PC is the M.2
-
Cloning error -00001 [ffffffff]
-
thanks, im checking right now
-
how is that? i bought 2 SSD and the M.2 from samsung, i have to download?
-
looks pretty hard, hope i can do it, thanks
-
you have a tutorial in particular?
-
the exact name of the software is "EaseUS Todo Backup Home 10.6"
