Rookie

Just put the system back into the 750D after having it on the table. Plugged in just the SSD, and I finally managed to go past the splash screen and log in. 30 seconds after logging in however I got a BSoD, stating "DRIVER_POWER_STATE_FAILURE". So I'm assuming that an old, missing or corrupted driver is to blame?

Just recieved my new AX860i an hour ago, tested with that, shut down still occurs. I should mention that the system was working perfectly in my previous case 1 day ago, I only switched it into the 750D. I didn't mess with the CPU or RAM when swapping them over. My feeling is that the mobo has shorted at some point perhaps. If I have damaged a component its not so much of an issue as Ive got more parts incoming...

OK, CPU temp in bios , 25 degrees Celsius. Took system out, tested with mobo, cpu, ram, gpu, psu and ssd sitting on my mobo box. Same problem. Reseasted CPU, applied new paste, same issue. Any other ideas? It seems that its having trouble getting to the windows logon screen. Would a short have caused this, perhaps killing a component? It performs fine in bios.

Hey guys, Just received my Corsair 750D and put my existing system into it. When I power up, 2-3 seconds into the Windows 8 splash screen it powers off (like pulling the plug). Just as it powers off, the CPU POST LED flashes once (mobo does not have speaker or readout). Have reseated RAM and SSD connections, checked power cables. Slightly noobish here, so any help would be great! AMD Phenom II X4 965 BE (stock cooler) Asus Crosshair IV Formula 2x2GB Dominator GT EVGA GTX780 Samsung 840 Pro 256GB 4x4TB Seagate Barracuda Corsair TX850W Corsair 750D