@Jumper118, it restarts twice when I tweak the CPU.
Here are some more tests ive done. And it seems like the RAM and VGA are causing problems?
Step by step.
I set Genie 4 ON.
I set beta runner ON
I tweaked CPU base clock to 125
Note that Cpu Core Voltage cant be changed in while genie is on function is on.
Pictures- http://www.overclock.net/content/type/61/id/2859820 http://www.overclock.net/content/type/61/id/2859821
RESULTS:
PC booted and 2 seconds later it restarted and booted on it self again. First restart showed red on RAM, 2nd restart showing red lights on VGA, EZ Debug Led on motherboard. It than froze on Windows loading screen.
2nd Try
I reset PC and tried this. Since the voltage was not possible to change while OC Genie was enabled, I HAD to turn it off.
Turning it off changes the settings displayed abit, ill show with screens.
Step by step
Turned OC Genie OFF.
Beta Runner disabled.
CPU ratio at max 34. <- If i try to change this to something higher its goes to "Auto" on it self.
EIST Disabled, tho Inter Turbo Boost cant be disabled with beta runner disabled.
CPU Base Clock 125
Voltage 1.350
Pictures- http://www.overclock.net/content/type/61/id/2859824 http://www.overclock.net/content/type/61/id/2859825 http://www.overclock.net/content/type/61/id/2859826
This time PC booted, and again restarted once after only running 2-3 seconds, but this time it went through Windows screen and started up normally after that. Tho the same red lights on both restarts as previous oc.
As you see above, CPU-Z shows 3,4ghz, and the bus speed still at 99,76mhz, even tho I changed it to 125.
In conclusion, changing any setting in OC Genie 4 while its ON is not possible due to voltage is not possible to alternate.
Third Try
I did the EXACT same settings as above, ONLY this time I changed the Beta Runner to enabled. NOTE that enabling beta runner automatically disables Turbo and EIST.
Results: Pc restarted twice as usual. First start was with a red light on EZ Debug Led RAM, after the restart the red light disappeared on VRAM and VGA red light turned on instead. The same as above.
I got into the PC windows, and CPU-Z shows the exact same thing as previous test. 3,391.7MHz, 34multiplier and 99,76Mhz.
4th try
I turned onOC Genie and let it run as it always have just to test out the red lights dillemma. It still restarted twice and same lights went off. The CPU-Z shows approx 4ghz, and multiplier 39, also buspeed 99mhz. Tho these settings are OC Genie ON. Could the RAM be causing this problem? And why would the RAM light error disappear after restarting it self and instead VGA turn red? There are aboslutely no problems while in windows tho. Also both the card and ram are brand new. So is the cpu.
Gonna try some more tests and post here. Thank you for anyone taking the time to help me out with this.
Regards Bill-