BugadinhoGamers

My cable is a USB 2.0, the only reason i am trying to use the 3.0 port is more of a convenience factor, as my USB 2.0 ports are all used up, and i have to always sacrifice some peripheral to plug my phone in for data transfer.

Thanks for the cleaning tip, tho i already tried that once before. This popup does appear, but only when plugged into the USB 2.0 port, once i plug it into the 3.0 port, it's as if the phone doesn't know it's plugged into a PC but rather a puny charger.

Ever since i bought my current phone (Moto Z3 Play), i've had two major USB issues: After unplugging the phone from the USB (2.0) port the phone still thinks it's connected and has to be restarted in order for it to become normal again; if the phone gets connected to any of the USB 3.0 ports, it just doesn't do data, and only charges it (slowly). I don't think this is a hardware failure, as none of the problems occur on computers other than my main rig, could it be a driver issue? PS: Currently using a GA-78LMT-USB3 R6 as my motherboard with a VIA USB 3.0 controller, and i am running the latest version of Android on my phone, and the latest Windows 10 on my PC.

We dont have another PSU to try it.

Did it and it didnt solve it

That is very likely, but we are testing some other stuff just to be absolutely sure

Reseated the GPU and the issue is still present

Idle temps are around 36 Degrees celsius, and while loading GTA V the temps are at 40C before the PC shuts down.

My friend recently bought a Nvidia GTX 1050 and every time he tries to run a game like Portal 2 or GTA V the game opens and the PC shuts down, the seller he bought it from said he needed to format his PC, but i don't think that is the cause of his issues with the GPU, his Windows install is somewhat clean and he uninstalled his previous driver before installing the driver for the GTX 1050. MOBO: MSI H81-E33 CPU: Pentium G3220 (he doesnt care too much for bottlenecking) RAM: 8GB (2x4gb) DDR3 GPU: Asus GTX 1050 2GB (PH-GTX1050-2G) PSU: BlueCase 500w Blu 500R-B (Brazillian brand psu)

This is the best picture i could take

Basicly, i got this CPU for free and there are these marks on the CPU heatspreader, what are them?

Which one of them?

how can i do this?

I tried twice already, when the system is updating and reaches around 25% it reboots and goes to a screen reverting to an old version, i really wanted to update it, can someone help?

But is it at least possible to do a temporary root that is removed on restart?