will121162

restart your pc, spam the 'delete' key to open the BIOS/ UEFI find the setting called XMP, should be on the first page but if not look around or check the manual. enable XMP save changes exit should be using XMP, thus getting your desired speeds.

Hello, currently making a novice networking centre in my home, using windows file sharing, I've managed to make 2 hard drives and some SSDs accessible to the hole network. this is only a 1gigabit network but yet the speeds fluctuate from reasonable (80MB/s) to unusable (1-5MB/s). there was minimal traffic when I conducted these tests, and to make sure there was no bottle neck with the hardware at each end, I was transferring from SSD (SATA) to SSD (NVME 3.0). (granted not exactly a RAID 0 NVME4.0 but should easily saturate a 1gig switch.) I'm using; *BT home hub 6 (upgrading to a NETGEAR D7000-200UKS Nighthawk AC1900 soon) *NETGEAR GS305 5 Port Gigabit Ethernet Network Switch *MACHINE 1* B350 msi pro, R5 1600, 16GB ram 2400Mhz, various drives - 1gig ethernet port *ex gaming machine* *MACHINE 2* B550 msi tomahawk, R7 3700, 16GB 3600Mhz, NVME4.0 and 3.0- using the 1gig ethernet port but also has 2.5gig *current gaming machine* * both on latest windows 10 pro only issue I could see is both devices are running off one switch that is then only got a single CAT5e connection to the router. I want them both on windows rather than running Linux as I don't know f**k all about Linux. if anyone's able to tell me what I'm doing wrong id be greatly appreciative thanks! peak speeds were about 80MB/s lows were about 10MB/s

so my RAM speed is 2400mhz in the bios but 1200hz in task manager..... whos telling the truth?

Hi guys, new to the world of NFC and wat to know if I can recreate my hotel room key in my phone. If so how? I'm hoping that NFC doesn't have a MAC address of sorts that I cannot change but rather one that I can reprogram to open my door. All info about this is really helpful as I know very little about this stuff. Hope you all have great days!

download Geforce Experience and it will automatically download the ideal driver https://www.geforce.co.uk/geforce-experience/download just make sure to turn off your PC before you unplug the existing gpu then plug in the new one. sorry but idk much about using RTX cards as i don't have one my self. good luck

Hi guys, I am looking to build an ITX size PC for my end of year project at college, i do not possess an ITX mother board and i was wondering if any of you guys had a template of the screw hole locations. any dimensions, templates or other useful information is all welcome. thanks have a nice day!

dw i know

thanks dude!

hi guys, making a 3d model in order to make a custom case for my system, im going to buy this card and so i would like to find out the dimensions of said card. if you could label them it would be great

i recently conducted a stable over clock on my ryzen 5 1600 up to 3.9 GHz and was trying to over clock my ram to 2400, it is corsair and so is good quality, my mother board is a B350 board but would seem to be good at over clocking due to the results with my CPU. any info would be great thanks:) CPU____AMD Ryzen 5 1600 Desktop CPU---- stock fan, getting a Be Quiet BK019 Dark Rock Pro3 MOBO__MSI AMD AM4 B350 PC Mate Ryzen Gen DDR4 VRR M.2 Audio LAN ATX Motherboard RAM___Corsair CMK8GX4M1A2400C14 Vengeance LPX 8 GB (1 x 8 GB) DDR4 2400 MHz C14 XMP 2.0 High Performance Desktop Memory Module PSU___Corsair CP-9020048-UK Builder Series CX600 ATX/EPS 80 PLUS Bronze Power Supply Unit, 600 W all names copied from amazon

What mother board would you suggest then??

Any suggestions about over clocking the cpu??

Vengeance LPX memory one slot of 8gb ryzen 5 1600 oc to 3.4ghz B350 mother board, msi pc mate gtx 1060 oc 600 watt PSU any thing will help

On EKs website it says that it fits all modern cpus both intel and amd, I assume this includes am3+ sockets but note sure. Any feed back is welcome https://www.ekfluidgaming.com/ek-supremacy-ax

thanks, i was thinking of using the EKWB fluid gaming a240g as i currently have a fx 6300 and wanted to over clock the $hit out of it