m84Degman

EFT is at ultra settings. First apex screenshot is at medium (Antialiasing off, textures max) and the second apex screenshot is at max settings. EFT is actually working good. Apex is not that smooth. I didn't believe that 2600 would be such a bottleneck. I guess ryzen 5600 it is. Now with updated bios it should be plug n play, fingers crossed.

It runs worse with the 22.5.2 drivers.

We've tried it before I did a clean windows 11 install. Did not make a difference. I can try it now on win 11. Another thing that got into my mind is to try a 1440p monitor (my friend has it. That should reduce the bottleneck.

Hi, my brother recently bought a new Sapphire Pulse RX 6650XT. At first he installed it himself and did a clean driver installation. In Apex Legends, Cycle and Escape From Tarkov the Gpu gets underutilized. Utilization is around 50%-70%, temps are good (65C), power draw up to 100W , CPU is at 40%. Games stutter alot and arguably run worse than with rx470. That's at 1080p and it does not matter if we play on low or max settings. At first I tried installing the GPU in my system (MSI B450 pro vdh max, Ryzen 5 3600, Rx 480 4gb, Gskill Aegis 2x8gb 3000 mhz (xmp enabled), 550W Fortron PSU, Samsung EVO 970 M.2 500GB SSD. I did a clean driver install on my pc and the games run the same. Do both CPUs bottleneck the GPU? Then I decided to update the bios on my brothers MBO (b450 mortar) 7B89v1H7(Beta version). That didn't help either. Then I did a fresh windows install (Windows 11 pro). Installed GPU drivers, Chipset drivers. Apex runs noticeably smother although the Gpu is still underutilized (50%-70%). Cycle still stutters. Haven't tried EFT yet. I'm still downloading it. Any ideas? Is it a CPU bottleneck (There is a slight bottleneck I believe), what else can I try? Thanks! Unigine Heaven bechmark utilizes the GPU 99% and works fine. System: Win 10 Home (Freshly installed maybe a month ago) Msi B450m Mortar Ryzen 5 2600 Corsair Vengance 2x8 Gb 3000 mhz CL 16 (xmp enabled) Before upgrade Sapphire Nitro RX470 4gb Corsair RM650x PSU M.2 Samsung EVO 980 500gb (main ssd) Sata Samsung EVO 950 250gb HDD WD Blue 500gb

Workstation video feed is not mission critical (not in a way that it would endanger patient lives). There would be no greater risk than there is now. We already have like 4 switches that can die just like monitors. Ep station is the only mission critical equipment it has its own workstation and independent monitors.

OBS is out of the question. Our goal is just to simplify things outside of the lab. We have 3 workstations each with 2 displays. We will probably go with a PbP monitor or a multivew switch.

Thank you guys. Solution which Nerdom mentioned is pretty slick. I've already found couple of monitors which support pip and pbp. We will need a pretty big screen so that multiple displays won't turn out to small. I've looked into the idea of streaming it to a single big screen. But the problem lies in the workstations. They are for single use only, you can only run their own dedicated software which we use for work. I don't know much about this stuff, but I'm not sure if it would work that way, we need some kind of capture card with plenty of inputs. I'm currently looking into multiview switchers. We will certainly have to make some kind of a compromise.Thank you for the advice. I will do some more research or this thing https://proav.roland.com/global/products/v-8hd/

Guys I need your help. I'm looking for a solution for a display at my workplace. We are looking for a solution which would enable us to connect up to 7 different display outputs to a single big screen and be able to view up to 3 minimum (max 6) simultaneously. I work in an EP lab and we are doing catheter ablations. We have 3 different workstations (two of them have dual displays), an x ray display and EP station display. Is there any solution or some kind of splitter that would enable that. The thing is we are getting new equipment and number of monitors on our desk is overwhelming. We want to clean things up and make it simpler. Thanks in advance. Cheers!

And speed was much better on the laptop (25 mbit/s) compared to the pc (10 mbit/s), and when we had tried with shorter cable that was provided with the router, speed on the laptop was even better (30+ mbit/s)

Hi, I've finally got the new router. The same problem is still there, it takes a long time to establish the connection. We've tried to connect the laptop with the same cable and it works with no problems, connection is established immediately. The motherboard is msi b450m mortar, could it be the ethernet port on the board? The board is half a year old and it worked with no problems with my previous provider. Please tell me that it is software or something that I can solve at home, I'm tierd of faulty hardware. Thanks!

Could it be that when he attached the ends (heads or however you call them) to the cable that he messed up something, they are not connectet properly although by my logic that shouldnt be the problem. If there is an loose conection there should be no connection or there would be problems with the connection all the time. Anyway thanks for the response. If someone has an idea please share. I had a conversation with my provider, they should send me a new router and I'm still arguing about the speed with them.

I had zero packets lost. The cable is new, it runs out of the router up trough the wall and into the attic, across and into my room. There are no kinks in the cable. Also the router is brand new. I was changing my provider, before that there were no similar issues. Technician said that probably because of the lenght. I dont see that as a problem.

Hi, I have a problem with my network. Every time I start up my pc it takes 2-10 minutes for the connection to work (troubleshooting reports no ethernet cable pluged in or the cable is damaged). After it estblishes connection the internet works fine for the rest of the day. My router is placed in the living room because of the tv and all around better wi fi in the house. That means I have to run around 20m of cable from the router to my pc. Does the lenght affect my network? As far as I know there shoud not be any problems up to 50m of cable lenght. Or should I get better quality cable if the cable is the problem. What do you suggest? Tnx in advance.

What do you have to say about this? Is it that much better with fast ram?

This maxtor is a PATA drive ....ill find another SATA drive and try with that ...those usb kits are quite expensive in croatia and I only need it once ..the data is not that important but i have some stuff I would like to se again