MajorZ

ok this got fixed after i replaced the Thermal Grizzly Kryonaut Thermal Grease Paste with ARCTIC MX-4 Thermal Compound, the radiator is mounted in the back of the case and i managed to fix the 2nd fan in the outside of the case. On idle i get gpu temp 27c - 30c, and when i launch game the temp doesnt go beyond 54c

Ok so i took everything and re-installed it back, now the normal temp is 29c - 36c which is good, but once i launch a game the temp goes to 85c. Below images when i opened up the screws and before i wipe off the thermal paste: and this is after cleaning with alcohol and kim wipes the way i applied the thermal paste: and finally after the assembly: please let me know what do you think is the cause for this ?

thank you all, i will take everything apart today and wipe off the thermal past and do it again

Hi there, so i installed Corsair H80i v2 on my GTX 1080 ti with the Kraken G12, i was following this guide : But when i started the pc and seen the temp is 62c and when i start a game the temp goes to 93c, i have applied Thermal Grizzly Kryonaut Thermal Grease Paste but i dont know what is wrong. any suggestion on how to fix this ? Note: i came to an issue where one of the two fans of the radiator will hit in the CPU cooler because of the limited space inside the case so i installed only one fan

Hi all, so i am planning to upgrade, i have the currently followings: Ballistix Elite 16GB Kit (8GBx2) DDR4 3600 MT/s (PC4-28800) SR x8 DIMM 288-Pin Gaming Memory - BLE2K8G4D36BEEAK GTX 1080 TI EVGA 650 GQ 210-GQ-0650-V1 80+ GOLD 650W Modular EVGA ECO Mode Power Supply i am planing to get the Ryzen 3600 and i read somewhere that best Motherboard are those supporting current core of 200a/150a/100a/75a and i need a budget x470 motherboard and supports my RAM speed. any suggestion ?

well this topic has resolved the CPU OC issue, i still need to figure out why the GPU crashes when i increases the power limit :wacko:

Dears, So when i tried to overclock my CPU to 4.4GHz or 4.2GHz my graphic card (AMD HD 7950) wont start or crash (what i get is black screen like the pc is not connected to the monitor), so i disconnected the power from the graphic card, then connected HDMI directly to the motherboard's HDMI port, then started the pc and it worked. after that i have removed the overclocking from the setting and reconnected the graphic card (AMD HD 7950) and it worked like charm! From the setting of AMD Catalyst (AMD Overdrive) i have noticed that if i increase the power limit it will cause the graphic card to crash. on the other-hand if i increases the GPU clock setting the graphic card will work perfect. Guys, am i facing power issue ? Components: Motherboard - ASROCK Z87 EXTREME3 -LGA1150 Intel Z87 Chipset DDR3 Quad CrossFireX Quad SLI SATA3 USB3.0 ATX Motherboard CPU - Intel Core i5-4670K Quad-Core Desktop Processor 3.4 GHZ 6 MB Cache - BX80646I54670 Graphic Card - Sapphire Radeon Vapor-X HD 7950 OC with Boost 3 GB DDR5 DL-DVI-I/SL-DVI-D/HDMI/DP PCI-Express Graphics Card 11196-09-40G 2 x Sata 7200 RPM 1 x SSD 2 x 4GB Ram Power supply - RAW POWER 600 WATT - FEATURES: ATX Version 2.31, suports dual 12V Rail 600 Watt moduler power supply unit for system with high configration Energy saving design with high efficiency more than 82% OCP, OLP, OPP, OVP, SCP, UVP Protection Intel I3, I5 and I7, AMD. & also supports Dual Core CPU Super silent 12cm sleeve bearing thermally controlled fan 20+4 pins (Nylon sheeve), P4+P4 (Nylon sheeve) 3PATA (Nylon sheeve), 1FDD, 4SATA (Nylon sheeve) 2PCI - E (6+6+2) (Nylon sheeve) 100% High temperature burn, 100% HI-POT tested Active Power Factor Correction (PFC)

let me detail the activities that is running on the current PCs, both is currently used to the max level and kept open for long hours, so the current PCs stuck because of that, so i decided to get a new pc with a better performance, even if it the performance was over what i need that wont be a problem, because maybe in the future i will use more heavy softwares. what exactly i need is to get advised about a good GPU and Motherboard that support what i need. @qwertywarrior for storage 2 hard drive will be enough size of PC woulding matter i got alot of space in the shop.

photoshop / illustrator and no i wont be using AutoCAD

hello all, so i am working on building 2 PCs for designing for my Stationery Shop's use, budget is USD1,300 for each PC. i have done my gaming build before, but now the build is for designing so here i am confused about which motherboard and which GPU should i go for ?? any advise would be appreciated .

well now i think the problem is solved by doing the scan and removing avast antivirus. thank you all for your efforts

woow im so infected !! have a look on the scan log MBAM-log-2013-11-29 (12-22-52).txt

i am on it.

ill try now, i just uninstalled avast and restarted the pc, and would you let know about the MSI because i have no idea about it :huh:

well i have installed all drivers, windows is pretty new, slow i mean in everything like moving mouse is supposed to be smooth but most of the time i get lag, open the browser is slow and the pc response in general is super slow, i dont get it.